Page 6 of 39 FirstFirst ... 2 3 4 5 6 7 8 9 10 16 ... LastLast
Results 51 to 60 of 384

Thread: 12GA FH--Hairy Shotgun/Rifle--

  1. #51
    Hooligan upgrayedd's Avatar
    Join Date
    Jan 2008
    Location
    Virginia
    Posts
    2,423
    Feedback Score
    3 (100%)

    Default

    NICE!!!!!!!!!!!!!

  2. #52
    Gunco Member hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    294
    Feedback Score
    0

    Default

    Here are more samples of nice 12ga slugs.....Here is pic of
    ones RG Henson sent. Jacketed 12ga. 715gr hollowpoints,
    on the right and in front a jkt 675gr hollowbase.
    RG's number 1-770-366-4846. These will be great for
    shorter plastic and brass cases as well as long cases.
    Other slugs in pic, in the back, left to right
    Foster 436gr- Dixie 600gr- 750gr brass- my 750gr hollowbase
    brass, and a hollowpoint I put a lightweight filler in the nose
    for streamlining..Ed


  3. #53
    Gunco Member hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    294
    Feedback Score
    0

    Default

    Here is picture of our case sectioned next to a
    thin factory brass case to show the great strength.
    And our case in pic was fired 35 times and shows
    no stretching. Ed


  4. #54
    Gunco Member hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    294
    Feedback Score
    0

    Default

    Testing 715gr jacketed hollowpoint from RG Henson in Savage 210.
    With 30 inch barrel, long brass 3.85" case, big primer.
    Slightly hairy load 290gr RL22--2700 fps. Shot moderate load
    of 300gr W-860 -- 2400 fps for 3 shot group of 3" at 50
    yards with my bad eyes and peep sights. They shoot nice, they go
    into target straight.. Other nice thing the price from RG,
    for customers getting in on his first run, $1.25 plus shipping.
    That is less than half of what other big bore jkt bullets cost.
    Call him for some great slugs. They are great like
    the Dixie slugs. Ed

  5. #55
    No Hope For Me 1biggun's Avatar
    Join Date
    Oct 2005
    Posts
    13,783
    Feedback Score
    14 (100%)

    Default

    2700 fps that like 30-06 speeds. man get a scope on that thing if it will hold up and see what it really can do. I cant belive you havent developed a flinch yet. I need more money for all these projects.

  6. #56
    Gunco Member hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    294
    Feedback Score
    0

    Default

    Lookee what another santa sent me.
    A regular BMG case on the left, and
    a straight BMG case on the right, and it
    CAME FROM THE MANUFACTURER THAT WAY.
    It is primer cartridge for large guns and howitzers.
    It is used in those guns/cannons that have powder in big bags.
    It is filled with powder and inserted into cannon breach and
    when fired sets off the larger charge. On some cannon breaches
    they have an automatic feed for these with a huge 40 round
    drum magazine. This on is marked IVI 89 C67. IVI is Canadian.
    On these breaches it is held by collet fingers for head space
    and for ejection.
    Ok, there are many thousands more of these out there than the
    PROP cases I showed before. We need to find few barrels of these
    and have Rob, etal, put on rims.... no annealing.....no fireforming,
    just slight resize to 12GA FH. Please help if you know of any.
    They would save so much work and time..And even though fired
    the bases are perfectly straight, another plus.....Ed

  7. #57
    No Hope For Me 1biggun's Avatar
    Join Date
    Oct 2005
    Posts
    13,783
    Feedback Score
    14 (100%)

    Default

    Is there a technicaly corrrect name to call these cases ?might help if doing a search.

  8. #58
    Gunco Member hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    294
    Feedback Score
    0

    Default

    I got the most info calling them primer cartridges.Ed

  9. #59
    Gunco Member hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    294
    Feedback Score
    0

    Default

    Here is a picture of RG's jacketed 715gr slugs in various
    loads.First are 2.75" and 3" factory foster slugs\ for
    comparison. 3rd is jkt HP in 3.5" plastic case, 4th in a
    3" brass RMC case. 5th in a 3.5" brass case with small
    primer, 6th in our long brass 3.85" case, big primer.
    Top hairy load in long case in Savage, 2900..Ed


  10. #60
    Gunco Member hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    294
    Feedback Score
    0

    Default

    Please notice in the picture above, cases loaded with
    the 715 gr jacketed slugs, the 3rd and 4th ones.
    They both have same 90gr of 4227, same number of
    wads, shoot at 1700 in 24" NEF barrel. 3rd plastic is
    3.5" case, the 4th brass is a 3" RMC. Both have shotgun
    primers.The 5th longer case is a 3.5" strong
    brass one I made from a PROP case, and when I put
    in primer bushing, I set it up for shotgun primer. I
    will test it with 4227 powder, 600gr and 715 gr slugs.
    Also in a couple months Rob, who's idea the 12GA FH
    was will be able to deliver the super strong 12GA FH
    cases made from BMG brass. And the they will be
    headstamped, all done by his CNC machine.Ed


Page 6 of 39 FirstFirst ... 2 3 4 5 6 7 8 9 10 16 ... LastLast

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •