Page 4 of 6 FirstFirst 1 2 3 4 5 6 LastLast
Results 31 to 40 of 53

Thread: Cetme Build Tutorial

  1. #31
    redchevyman's Avatar
    Join Date
    Nov 2004
    Location
    West of the Rockies
    Posts
    2,214
    Feedback Score
    74 (100%)

    Default

    any more progress on this build?
    Buy your US made AK-47 compliance parts here.
    Best price on US made AK parts! also $5 flat rate shipping .
    http://www.rcmgunparts.com/

  2. #32
    tired of idiots vz58's Avatar
    Join Date
    Sep 2006
    Location
    central NC
    Posts
    2,276
    Feedback Score
    25 (100%)

    Default

    I just bent my flat this afternoon, super easy! 3/4" rod drilled and bolted to a piece of plywood. I used a couple of 1/4" steel scrap as a pry bar, about 20 min of work including some tweeking befor eI spot welded it.

  3. #33
    redchevyman's Avatar
    Join Date
    Nov 2004
    Location
    West of the Rockies
    Posts
    2,214
    Feedback Score
    74 (100%)

    Default

    Quote Originally Posted by vz58
    I just bent my flat this afternoon, super easy! 3/4" rod drilled and bolted to a piece of plywood. I used a couple of 1/4" steel scrap as a pry bar, about 20 min of work including some tweeking befor eI spot welded it.
    Does your bolt carrier and cocking tube fit in the receiver?
    Buy your US made AK-47 compliance parts here.
    Best price on US made AK parts! also $5 flat rate shipping .
    http://www.rcmgunparts.com/

  4. #34
    tired of idiots vz58's Avatar
    Join Date
    Sep 2006
    Location
    central NC
    Posts
    2,276
    Feedback Score
    25 (100%)

    Default

    bolt carrier and bolt fit smooth. The cocking tube on the centerfire kit is all kinds of bubba rewelded, dented and fugly. So no I have not fit the tube. However it does look like it would.

  5. #35
    Gunco Member 1988-4551's Avatar
    Join Date
    Apr 2008
    Posts
    53
    Feedback Score
    0

    Default

    bump. Any possibility of a build tutorial being made into a downloadable pdf?

  6. #36
    Gunco Regular bubbamauser's Avatar
    Join Date
    Mar 2006
    Posts
    420
    Feedback Score
    1 (100%)

    Default

    seems like the thread stalled so here are 2 pictures of what your trigger parts should look like before reassembly




    Cocking tube and trunnion welded in


    remember the headspacing is done with feeler guages so the gap between bolt head and bolt head carrier are between.004-.020

    if you use a cast receiver you will need to polish the inside of the cocking tube and the trunion hole for them to fit

    I chose grip, stock, mags, receiver(CIA cast, roll your own wasn't available yet) and removed the barrel threads and crowned to come in under the parts count because at the time it was all I could get.

    when all was said and done this is what I got



    This is thanks to Diablo and rusty pirate from the now defunct cetmerifles.com for all of their help.

  7. #37
    Gunco Member pale horse's Avatar
    Join Date
    Dec 2008
    Location
    I live in a eskimoe village of 200 great hunting & fishing
    Posts
    65
    Feedback Score
    2 (100%)

    Default

    have not seen any cetme kit around sure would like get one myself I missed out years ago when they where lots of them around anyone seen any or have any extra for sale

  8. #38
    Gunco Rookie reiff34's Avatar
    Join Date
    Dec 2008
    Posts
    4
    Feedback Score
    0

    Default

    Could some one please tell me where the best place to get Cetme flats is and also what is the best procedure to bend them correctly......where is the best places to get Cetme Parts???? Thank you....
    Reiff34

  9. #39
    Gunco Rookie sglider88's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    17
    Feedback Score
    1 (100%)

    Default

    You can get flats at Ohio Rapid Fire,same flat as HK91, Apex gun parts has cetme parts, and robertg.com has some cetme parts and info about cetme and HK compatability.

  10. #40
    Gunco Rookie reiff34's Avatar
    Join Date
    Dec 2008
    Posts
    4
    Feedback Score
    0

    Smile

    Hey, Thanks For The Info......Just Great.....Have A Safe New Years.....


Page 4 of 6 FirstFirst 1 2 3 4 5 6 LastLast

Search tags for this page

cetme build tutorial

Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •