What ad did you find?
This is the only one I see and you can trust them.
Cobray M10 Receiver Frame Flat and Drawings : Parts Kits at GunBroker.com
i am looking for a good deal on flats kits for a mac 10 i found a vendor on gun broker but it wants a cashiers check mailed.
so i am a little Leary. anyone know a good source of flats?
ya but that is a foldable flat ever try to fold 1/8 the inch steel??
it is a pain in the ass.
Oops, thought you were looking for a plain flat.
If I come across anything I'll let you know
Those 1/8th inch thick M-10 flats are easier to fold if you groove the fold line (inside surface) with a mill cut about .065 inch deep. A 1/2 inch ball end mill works for this groove. Also a 3/8 inch diameter end mill with the corners bevelled to 45 degrees works fine. Always fold these flats sandwich clamped to the proper size mandrel.
If you dont want to fold, look for the three part weld up pieces, remember you will also need the mag well and the trigger guard, but its an easy build if you can weld or find a friend who can
Last edited by hk22045; 10-07-2009 at 12:53 AM.
The weld together is fairly straight forward. Took me about an hour from start to finish
Where in Vegas are you lasinvegas, looking for others to do sa group build or just help out on builds.PM me if you want
Theres one for sale on the files front page of the marketplace for 55 shipped. dont know if it is cool to post that here, but thought it would be helpful. OOPs, I see this is an old post