Page 1 of 4 1 2 3 4 LastLast
Results 1 to 10 of 31

Thread: KP-44/PPS-43 flat bending jig

  1. #1
    Gunco Regular bubbamauser's Avatar
    Join Date
    Mar 2006
    Posts
    398
    Feedback Score
    1 (100%)

    Default KP-44/PPS-43 flat bending jig and kp-44 build

    I welded this up from some old gas line I put on the side for this project when I replace my piping I used a 3/4 inch schedule 40 pipe for the die with 2 holes to keep the flat straight, I wanted a little more strenght for the jig so i used 1 inch spaced off of the die and 1 layer of 14 ga. on either side to give me the clearance to push my flat through I welded them to 2 pieces of angle iron. The flat is lowes 14 guage with the flat dimensions from the post here :-* I made my flat larger and the cut out lines smaller to compensate for my sharpie layout tecnique






    Last edited by bubbamauser; 03-31-2011 at 03:10 PM.

  2. #2
    Gunco Member rapidrus's Avatar
    Join Date
    Aug 2010
    Posts
    285
    Feedback Score
    0

    Default

    COOL, when you get that trimmed up show us another pic

  3. #3
    No Hope For Me Coils's Avatar
    Join Date
    Feb 2005
    Location
    PA Where the Amish Roam Free
    Posts
    13,987
    Feedback Score
    38 (100%)

    Default

    Thanks for the pics
    Nice and simple design
    "Government is not the solution to our problem, government is the problem" Ronald Reagan

  4. #4
    Gunco Regular bubbamauser's Avatar
    Join Date
    Mar 2006
    Posts
    398
    Feedback Score
    1 (100%)

    Default

    Thanks guys

    I'll follow this up with pics as I progress

  5. #5
    Gunco Member IRONMULE's Avatar
    Join Date
    Feb 2009
    Posts
    149
    Feedback Score
    0

    Default

    Wow thats a good idea! Sure looks simple and cheap to do at home. Thumbs up

  6. #6
    Gunco Regular bubbamauser's Avatar
    Join Date
    Mar 2006
    Posts
    398
    Feedback Score
    1 (100%)

    Default

    heres todays progress on the kp-44

  7. #7
    GuncoHolic kernelkrink's Avatar
    Join Date
    Jun 2004
    Posts
    4,931
    Feedback Score
    2 (100%)

    Default

    Where did you get the template for the flat?

  8. #8
    Gunco Regular bubbamauser's Avatar
    Join Date
    Mar 2006
    Posts
    398
    Feedback Score
    1 (100%)

    Default

    I got it from The "Guild"

    Login

  9. #9
    Gunco Veteran Viper Dude's Avatar
    Join Date
    Feb 2005
    Posts
    1,686
    Feedback Score
    0

    Default

    Hello bubbamauser,
    Could you post a drawing of your pattern with specs ?? That would be most appreciated.

    Thanks,
    VD

  10. #10
    No Hope For Me Coils's Avatar
    Join Date
    Feb 2005
    Location
    PA Where the Amish Roam Free
    Posts
    13,987
    Feedback Score
    38 (100%)

    Default

    Beat him to it

    I did get it from the link provided to the Weapons Guild, if that's an issue let me know and I'll remove it.
    Attached Images Attached Images
    "Government is not the solution to our problem, government is the problem" Ronald Reagan

Page 1 of 4 1 2 3 4 LastLast

Search tags for this page

bend jig for pps43 flat

,

jig for pps 43

,

kp-44

,
pps 43 bending dies
,
pps 43 flat bend
,

pps 43 flat bending jig

,
pps 43 pattern
,

pps bending die

,
pps43 bending
,
pps43 pipe jig
,

pps43 reciver jigg

,
what are the measurements for the pps 43
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •