sounds goo. ill give it a try. thanks
If you're good with sheetmetal, there was a thread on another site where the builder used a 1 1/8" rod with a key slot in it as a mandrel and hammered in two denial bars similar to what was on his PPS43C semi pistol. There is a denial bar behind the rear site and another one between it and the front trunnion. IIRC they found that you can still fire one shot with only the rear bar and a fa bolt and unmodified lower, and required the two bars. If you do a google image search for pps43c, you can see the two denial bars I'm talking about.
Last edited by moleman; 08-15-2013 at 08:30 AM. Reason: add