Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15

Thread: Making of CZ26 Tube.

  1. #11
    GuncoHolic 2ndAmendican's Avatar
    Join Date
    May 2009
    Location
    Taylors, S.C.
    Posts
    4,688
    Feedback Score
    34 (100%)

    Default

    Ok, I found the info, never mind. Wrong size. Oh well.
    Enforcement, NOT Amnesty!!!!!!

    "If they’re going to come here illegally, apply for & receive assistance through a corrupted Government agency encouraging this lawless behavior, work under the table & send billions of dollars each year back to their families in Mexico, while bleeding local economies dry, protest in our streets waving their Mexican flags DEMANDING rights, while I have to press ’1′ for English, then they need to be shipped back to where they came from!" -Chad Miller

  2. #12
    Gunco Regular Pryotex's Avatar
    Join Date
    Feb 2012
    Posts
    510
    Feedback Score
    1 (100%)

    Default

    Im not in to shop right now, Remember if you have a KIT measure the BOLT and add a few thou. NOT THE RECEIVER PIECES. if you look closely, there are raised lands in the tube that changes the ID needed.
    Pryotex is TEC Tactical, A Licensed 07/SOT

  3. #13
    Gunco Regular driswalds's Avatar
    Join Date
    Oct 2005
    Posts
    588
    Feedback Score
    3 (100%)

    Default

    I thought the bolt had recesses in it that fit the raised lands.

  4. #14
    Gunco Regular Pryotex's Avatar
    Join Date
    Feb 2012
    Posts
    510
    Feedback Score
    1 (100%)

    Default

    Quote Originally Posted by driswalds View Post
    I thought the bolt had recesses in it that fit the raised lands.
    The bolt Rides on the lands to prevent dirt jamming and the "air piston" effect. Most kits with the rear threaded lugs still there will have the lands. You can place the bolt in there and see how it rides.
    Pryotex is TEC Tactical, A Licensed 07/SOT

  5. #15
    Gunco Regular Pryotex's Avatar
    Join Date
    Feb 2012
    Posts
    510
    Feedback Score
    1 (100%)

    Default

    While waiting on BATF approval for my FFL receiver I made some non firearm tubes to help the builds along. Rather than photocopy a template that gets all messed up, I drew mine on with the CNC so everything is exactly the dimensions it should be. The Cocking handle slot and Blocking bar cuts are already made because if the timing is off on them, the bolt will jam up. I have 10 to build up and will keep ya posted.

    Attached Images Attached Images
    Pryotex is TEC Tactical, A Licensed 07/SOT

Page 2 of 2 FirstFirst 1 2

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •