Thought I would post a few pics of a semi DSHK I built around christmas from one of the polish parts sets
here are a few pics of an m2 bbl I fitted to my dshk to shoot cheap 50 ammo
here is a pic of the gas block and gastube support I machined to fit the m2 bbl
Have you shot it, or waiting for range time? I was going to get into that and things just didn't work out. It seemed, at the time, that there was really only two ways to "use" one - either sleeve it to .50 BMG or pay through the nose for Russian .50. What are you going to do?
Gunco Member #10
The "original" Boltcutter Rivet Squeezers:
Project Pink - the Pink and Blue AK-74:
I have fired about 35 rounds here at the house thru it with an m2 bbl .
The middle bbl in the pic above is an m2 bbl I turned down , the pic right below it is the gas block and gastube support. I machined a sleeve to fit OVER the turned down portion of th m2 bbl with a key at the top for the bbl wedge to contact. The sleeve is screwed in place over the m2 bbl and with the new gas block and support the dshk gas tube fits right in place and the new bbl assembly slides right in place of the original bbl. Didnt modify the original bbl at all and can interchange at will. Using the m2 donor bbl with the adapter sleeve in place has worked well, no sleeve to slip. I do miss the look of the finned bbl.
That is WAY OUT of my league!! I bow to a true craftsman.....Got any pics of it fully assembled? how about in action.....That is just too cool
dude , you are a gifted craftsman . and thats all I got to say about that
Will Hayden, RedJacket Firearms