Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17

Thread: 11.5" chrome lined barrel deal $156

  1. #1
    Gunco Addicted for life j427x's Avatar
    Join Date
    Oct 2006
    Posts
    8,875
    Feedback Score
    8 (100%)

    Default 11.5" chrome lined barrel deal $156

    DPMS Barrel AR-15 Pistol 5.56x45mm NATO Heavy Contour 1 in 9" Twist 11.5" Chrome Lined Chrome Moly Matte with Front Sight Tower Pre-Ban - MidwayUSA

    $165 discount code for june 223610 gives $10 off at checkout. they just got these in stock and there are about a dozen left.

    $155 for a chrome lined barrel ain't too bad. these have been hard to come by since the panic for less than $200.

    you can use these to build a pistol or a 11.5" barreled rifle with a 4.5"-5.5" welded or blind pinned for a total of at least 16".

    or you can do the NFA thing pay the $200 and get the proper stamp and do a SBR--while you can.

    these come with barrel nut, m4 style ramps, front sight base and end cap. 1/2-28 on the muzzle. they are H-bar profile, chrome barrel and chamber, 1 turn in 9" twist rate, NATO spec chamber.

    these make a pretty decent xm-177e2 replica with the correct length flash hider pinned/welded/soldered on.

  2. #2
    SniperPig TheCol.U.S.M.C.'s Avatar
    Join Date
    Aug 2008
    Location
    Phoenix AZ
    Posts
    737
    Feedback Score
    1 (100%)

    Default

    damm that is tempting The ATF cashed my check for my SBR may 10 I might to order one (I have a few pistol lowers with out barrels I could put it on till my paperwork clears)

  3. #3
    Gunco Addicted for life j427x's Avatar
    Join Date
    Oct 2006
    Posts
    8,875
    Feedback Score
    8 (100%)

    Postak

    i am building a xm177e2 "clone"-- it won't be an exact copy as this is a heavy barrel. i am going to use a a2 upper too. with the 4.6" flash hider blind pinned on it is going to be exactly 16.15" length wise which gets me out of NFA regulation. will be reasonably close to the real 177e2. mine will have a few modern things like 1-9 twist, Hbar, black finish but most important it will FEEL a lot like the old 177e2--

    the one in the photo is a e1 that was 10" and some odd --i think 10.2"

    the e2 is just like the e1 but it was 11.5" all the old ones were pencil barreled with very slow twist rates.

    one of these days i am going to finish that a1 build i bought that upper for a decade ago--LOL!
    Attached Images Attached Images

  4. #4
    Gunco Regular eyegun's Avatar
    Join Date
    Mar 2005
    Posts
    524
    Feedback Score
    4 (100%)

    Default

    Thanks for the heads up I just snagged two!

  5. #5
    SniperPig TheCol.U.S.M.C.'s Avatar
    Join Date
    Aug 2008
    Location
    Phoenix AZ
    Posts
    737
    Feedback Score
    1 (100%)

    Default

    j427x do you know what the code is to get $20 off on $200 buy, at checkout? I messed up and deleted the email from midway with the codes on them

  6. #6
    Gunco Addicted for life j427x's Avatar
    Join Date
    Oct 2006
    Posts
    8,875
    Feedback Score
    8 (100%)

    Default

    as far as i know there are only three codes for june one is a $10 and the other i think is a $50& $100 off $1K IIRC.

    ok here are the codes i got for june --but no $20 off $200 and no $15 off $150 like last month. there kind of skimpy on the discount code for this month if ya ask me. just a couple months back they were giving sack fulls of codes in $10 , $15, $20, $25 $30 per $100 spent.

    223610 $10 off

    308610 $50 off $500

    338610 $100 off $1,000

  7. #7
    Gunco Addicted for life j427x's Avatar
    Join Date
    Oct 2006
    Posts
    8,875
    Feedback Score
    8 (100%)

    Default

    down to the last six of these. when they go OOS it could be weeks or months before there are any more. or they could get a dump truck load of the in stock next week. YMMV

    my experience lately is when something is OOS. get ready for a long, long wait.

  8. #8
    gunco irregular moleman's Avatar
    Join Date
    Feb 2005
    Location
    Next door to my neighbors house in Michigan
    Posts
    3,143
    Feedback Score
    3 (100%)

    Default

    Jse also has a cheap m4 profile unfinished barrel for $70. It needs the gas port drilled and parkerized though. 16 In M4 Profile Chrome Moly 1x9 5.56 - In the white SPECIAL You'd be hard pressed to make one for yourself for that price.

  9. #9
    Gunco Addicted for life j427x's Avatar
    Join Date
    Oct 2006
    Posts
    8,875
    Feedback Score
    8 (100%)

    Default

    Quote Originally Posted by moleman View Post
    Jse also has a cheap m4 profile unfinished barrel for $70. It needs the gas port drilled and parkerized though. 16 In M4 Profile Chrome Moly 1x9 5.56 - In the white SPECIAL You'd be hard pressed to make one for yourself for that price.

    now if i could turn that down to GI profile and convert it to a middy?!--LOL!

  10. #10
    Gunco Regular logan09's Avatar
    Join Date
    Dec 2008
    Posts
    574
    Feedback Score
    3 (100%)

    Default

    Prices on AR's are really dropping.

Page 1 of 2 1 2 LastLast

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •