My conversion is finished. I used a Tapco G2 fire control group. A Tapco disconnector spring, and retaining plate. A Tapco Ak buttstock. Tapco Saw
pistol group and A Tapco pistol grip nut. The parts cost $111.70 dollars shipped. I got them from carolinashootersupply. They came within a week.
I used a 8-32 bolt and nut to anchor the trigger gaurd.
Machine work, I demilled two rivits and three spot welds on the plate underneath the receiver. The pistol grip square hole had to be cut out as well. And, I drilled a hole for the the trigger gaurd nut. The hammer also has to be ground down , use the Saiga one for a guide.
I sanded the receiver, degreased it and used Krylon BBQ paint to touch it up.
It is ready to go to the range tommorro to test fire.