Results 1 to 8 of 8

Thread: Semi RPD FCG

  1. #1
    Gunco Member IRONMULE's Avatar
    Join Date
    Feb 2009
    Posts
    149
    Feedback Score
    0

    Default Semi RPD FCG

    Hello Pirate I know you have been busy. I needed to ask you for a advise of installing your semi FCG for the RPD. I see the assembly of the whole trigger set up. I see the "wedge" shaped part would need to be trimmed fitted to the trigger. The semi design is the trigger pushes the wedge which will push the whole assembly forward therefore will release the striker block to fire the firing pin, correct?, but how do you determine how much to cut off the wedge part? Appreicate your advise, Thanks Have a good one

  2. #2
    Administrator pirate56's Avatar
    Join Date
    Dec 2004
    Posts
    4,996
    Feedback Score
    31 (100%)

    Default

    assemble the parts in the lower and pull the trigger forward till it contacts the wedge. then scribe a line with a razor on the wedge at the front of the trigger. that is where to trim it.

  3. #3
    Gunco Member IRONMULE's Avatar
    Join Date
    Feb 2009
    Posts
    149
    Feedback Score
    0

    Default

    Hello Pirate I was thinking the same idea, to first scribe the line then cut the wedge, I didn't want to guess a cut and ruin the wedge, thanks for confirming that. You've been a big help. Have a good one Cheers

  4. #4
    Gunco Rookie rkautomotive's Avatar
    Join Date
    Mar 2011
    Posts
    10
    Feedback Score
    0

    Default rpd fcg

    Sorry if this is common knowledge but where do i purchase this fcg?

  5. #5
    Administrator pirate56's Avatar
    Join Date
    Dec 2004
    Posts
    4,996
    Feedback Score
    31 (100%)

    Default

    I have semi parts sets available they are $150.00 you can call the shop to order

    561 394 8228

  6. #6
    Gunco Rookie rkautomotive's Avatar
    Join Date
    Mar 2011
    Posts
    10
    Feedback Score
    0

    Default

    Thanks Pirate!

  7. #7
    Gunco Veteran patjsimpson's Avatar
    Join Date
    Oct 2008
    Posts
    1,464
    Feedback Score
    25 (100%)

    Default

    Quote Originally Posted by pirate56 View Post
    I have semi parts sets available they are $150.00 you can call the shop to order

    561 394 8228
    Hello Pirate... are these made by you or some other vendor?
    thx
    Pat

  8. #8
    Administrator pirate56's Avatar
    Join Date
    Dec 2004
    Posts
    4,996
    Feedback Score
    31 (100%)

    Default

    Quote Originally Posted by patjsimpson View Post
    Hello Pirate... are these made by you or some other vendor?
    thx
    Pat
    I have these made for me by a cnc shop, they are slightly different dimentionaly than the ones that were sold by wise lite and a lot different than the vector ones.

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •