Results 1 to 5 of 5

Thread: milled parts on stamped receiver

  1. #1
    Gunco Rookie mboehlke's Avatar
    Join Date
    Dec 2011
    Location
    Osceola County Fl
    Posts
    6
    Feedback Score
    0

    Default milled parts on stamped receiver

    This has probably been asked a 1000 times but I can't find a reference yet. question is can a parts kit for a milled receiver be used in a stamped one? I know there are some barrel issues but will the trunnions be ok?

  2. #2
    No Hope For Me Coils's Avatar
    Join Date
    Feb 2005
    Location
    PA Where the Amish Roam Free
    Posts
    14,039
    Feedback Score
    38 (100%)

    Default

    Yes you can.
    But more details on the kit will help. Does it have a barrel, or any pieces of the milled receiver?

    If you don't have any of the receiver pieces you can get a trunnion and stock tang, the barrel may need to be fitted to the trunnion. If there's no barrel and only the parts that go on the barrel, you'll need an AK47 profile barrel, an AKM barrel is smaller in diameter.
    Check out this thread, it's the newest one on the subject, not much info but it's a start.
    http://www.gunco.net/forums/f3/ak-build-help-71017/
    "Government is not the solution to our problem, government is the problem" Ronald Reagan

  3. #3
    GuncoHolic Tommo's Avatar
    Join Date
    Mar 2004
    Posts
    3,006
    Feedback Score
    3 (100%)

  4. #4
    Gunco Rookie mboehlke's Avatar
    Join Date
    Dec 2011
    Location
    Osceola County Fl
    Posts
    6
    Feedback Score
    0

    Default

    Quote Originally Posted by Coils View Post
    Yes you can.
    But more details on the kit will help. Does it have a barrel, or any pieces of the milled receiver?

    If you don't have any of the receiver pieces you can get a trunnion and stock tang, the barrel may need to be fitted to the trunnion. If there's no barrel and only the parts that go on the barrel, you'll need an AK47 profile barrel, an AKM barrel is smaller in diameter.
    Check out this thread, it's the newest one on the subject, not much info but it's a start.
    http://www.gunco.net/forums/f3/ak-build-help-71017/
    Thanks for the info, was looking at a Bulgy milled kit. I've got several flats that need parts and was interested in the mating process. Again Thanks

  5. #5
    Gunco Rookie mboehlke's Avatar
    Join Date
    Dec 2011
    Location
    Osceola County Fl
    Posts
    6
    Feedback Score
    0

    Default

    Quote Originally Posted by Tommo View Post
    Thanks for link

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •