Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Need Opinions

  1. #1
    Gunco Good ole boy tanvil's Avatar
    Join Date
    Feb 2007
    Posts
    5,353
    Feedback Score
    20 (100%)

    Default Need Opinions

    Take a look at this Mauser bolt tutorial and tell me whether or not this would be considered butcher work. Aside from the plastic knob, do you think it will last?
    Any and all comments and or other advice would be appreciated.

    mauboltssolder

  2. #2
    GuncoHolic kernelkrink's Avatar
    Join Date
    Jun 2004
    Posts
    4,961
    Feedback Score
    2 (100%)

    Default

    Yep, Bubba job at least. Note he says this is for the tinkerer without an oxy torch or welder, yet he is using a bolt heatsink and paste to protect the threads while heating. I would say 99.9% of the people with a welder lack that tool, how about the welderless? What would worry me about the longevity is the area where he soldered, if the heat got too high the grade 8 bolt would bend easily there.

  3. #3
    No Hope For Me Coils's Avatar
    Join Date
    Feb 2005
    Location
    PA Where the Amish Roam Free
    Posts
    14,039
    Feedback Score
    38 (100%)

    Default

    Yep, looks Bubba
    "Government is not the solution to our problem, government is the problem" Ronald Reagan

  4. #4
    Gunco Member withers.45's Avatar
    Join Date
    Apr 2011
    Posts
    158
    Feedback Score
    0

    Default

    My first thought was its pretty dang ugly.

  5. #5
    Gunco Regular Rocster's Avatar
    Join Date
    May 2006
    Posts
    432
    Feedback Score
    4 (100%)

    Default

    Brownells has a godd tutorial article on the traditional method:
    http://www.brownells.com/.aspx/lid=1...r-Bolt-Handles
    "To invent, you need a good imagination and a pile of junk."
    - Thomas Alva Edison
    |> Military training/history DVDs: www.loose-cannon.com/military
    Latest eBook: Build Your Own AK: Vol. II

  6. #6
    GuncoHolic twa2471's Avatar
    Join Date
    Apr 2011
    Location
    Vermont
    Posts
    4,516
    Feedback Score
    4 (100%)

    Default

    I've tried this before on a Nagant, works, but a bit crude for my tastes if done as shown. I modified the tequnieque a bit before I did mine. I went to a 1/2" and cut a shoulder to go into the drilled bolt portion of the bolt and flattened it to a spoon type handle shape before installing and then welded it on with a mig and used a heat sink in the bolt as well as paste. I also case hardened it for the look of it. It worked well overall, I wanted to try it just for the experimentation value of it. I'd recomend it, if done the way I did, don't think I'd use the 1/4" though, to weak for those hard to chambering x54 rounds in my opinion. The basic idea is ok though, just needed to be stronger in my opinion, that's why I went the extra mile on mine and did it "my way". Worked fine for the 3 years I had it and is still going strong for the new owner 5 years down the road with tons of rounds through it. No issues if you do it correctly, and stronger. I'd be leary about doing it the way discribed in the original tutorial though. That's been my experiances with this method. My method was stronger and looked good too, so this method does have merrit if you don't have a bending jig. Next time I see my bud I'll try to remember to get a pic and post it.

  7. #7
    Citizen, Patriot, Ranger bellson's Avatar
    Join Date
    Dec 2005
    Location
    Peoples Republik of Kalifornia
    Posts
    2,605
    Feedback Score
    7 (100%)

    Default

    Hello All,

    I know Steve Wagner. He's an upstanding guy, and a decent hobby gunsmith. He like to tinker, and he has come up with some interesting things. Don't be too hard on him, he is not a bubba.

    Read some of the other stuff he does on his site.

    Just my $0.02
    Imagine whirled peas

    Peace, Love, And Superior Firepower






    Bellson

  8. #8
    Gunco Good ole boy tanvil's Avatar
    Join Date
    Feb 2007
    Posts
    5,353
    Feedback Score
    20 (100%)

    Default

    I like his website.
    It seems the bolt mod would work if that was the only option to be had.
    For some, it very well might be.
    I would bet Fritz has the proper jig and could probably use the work though.

  9. #9
    Gunco Good ole boy tanvil's Avatar
    Join Date
    Feb 2007
    Posts
    5,353
    Feedback Score
    20 (100%)

    Default

    In fact his bolt jeweling jig is pure genius.

    jb

  10. #10
    GuncoHolic twa2471's Avatar
    Join Date
    Apr 2011
    Location
    Vermont
    Posts
    4,516
    Feedback Score
    4 (100%)

    Default

    I agree with belson, I don't think it's a buba method at all, could just have been stronger. And the 1/4" hole is all your going to get on the bolt handle stub anyways. I just think by turning down the 1/2 to 1/4 and leaving a shoulder for the stub to rest on then weld the top where the hole comes through the stub, much stronger with minimal welding, one, 1/4" spot weld. Very little heat and simple. Win Win method to me and far from a last option!! Hell, I stold his method with my modifications to his idea, years ago, it really does work well. Try it out on an old Nagant some time like I did, it will surprise ya how easy it is and how well it realy works.

Page 1 of 2 1 2 LastLast

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •