MAN YOU GOT ALL THE COOL TOOLS.This is the fixture I used to mount the scope rail.
I MAY HAVE A FEW GOOD 8MM BARRELS HERE IF SOME ONE NEEDS ONE CHEAP.
LET ME DID THEM OUT AN SEE WHAT I GOT.
I reamed one of my Turk large rings to 8mm-06 wildcat. It had excess head space so I figured why not. A few guys on surplusrifleforum.com went in with me to buy a reamer, and pass it around. It gets you halfway between 30-06 and .338-06, and looks promising. I need to take it out and give it some love, see what it will do...
This will give you an idea how big and heavy the Mauser firing pins are. Pin hell, these ought to be called firing rods. LOL
The titanium FPs cut the mass by over 50%
The barrel I'm using is a Shilen #5 contour. It's 22" long, has a 1 in 10 twist and comes short chambered.
Installing the barrel.
I clamped the barrel into the barrel vise using lead shims.
With the receiver set up in the receiver wrench, it's just a matter of torquing it down.
I installed the receiver into the stock, then added the bolt lock, scope rail, grip cap, recoil pad and swivels.
It's getting close now.
"NA BEAN DON CHAT GUN LAMHAINN"
President Dwayne Elizondo Mountain Dew Herbert Camacho
i HAVE A SPORTERISED TURK MAUSER K KALE . ITS HAS A REALLY LIGHT WEIGHT PLASTIC STOCK WITH THAT USES NO FLOOR PLATE ITS A REALLY NICELY BALANCED GUN HAS A LIGHT WEIGHT 308 WIN SPORTER BARREL.
FROM WHAT IVE BEEN READING THE M96 6.5X55 SWEDE BARREL WILL SCREW RIGHT ON A TURK . I SEE YOU NEED TO TURN OF THE EXTENSION ON THE RECIVER OR TURN THE BARREL SPECIAL.
CAN A REMINGTON TAKE OFF BARREL HAVE THE EXISTING TREADS TURNED OFF AN BE THREADED FOR A SMALL RING??????? I THINK I SAW THAT IT CAN SOME WERE. IF SO THEN A BARREL CAN BE HAD CHEAP IF YOU GOT A LATHE OR KNOW SOME ONE.