Results 1 to 4 of 4

Thread: Problems with cold steel receivers?

  1. #1
    Chief Administrator 7.62x39's Avatar
    Join Date
    Feb 2004
    Posts
    6,543
    Feedback Score
    10 (100%)

    Default Problems with cold steel receivers?

    I saw this over at the files.

    It looks like there are some issues regarding the hole locations on the cold steel blanks.

    I know some of you guys were talking about using these blanks.
    You better double check the location of the marks before you drill.



    http://www.akfiles.com/forums/showthread.php?t=3355
    .

  2. #2
    Gunco Regular erikk's Avatar
    Join Date
    Mar 2004
    Location
    SW FL
    Posts
    318
    Feedback Score
    0

    Default

    Yes, the center punch marks were out of line on some of mine but I just used an Ace template to correct the problem. the mag rough cut out was ok. For me, the ace template is the one to use.

  3. #3
    Happy Camper hcpookie's Avatar
    Join Date
    Feb 2004
    Location
    Colorado Springs
    Posts
    7,695
    Feedback Score
    3 (100%)

    Default

    "Mine were out a whole lot" means nothing... How much were they out? Did the action fail to operate? Did they even test?

    It has been my observation that there is a great deal of tolerance for hole location, so a slight amount shouldn't affect functionality. I've built from several templates and had no problems so far. YMMV.

  4. #4
    Gunco Member Coldsteel's Avatar
    Join Date
    Jun 2004
    Location
    Longboat Key, Fl
    Posts
    96
    Feedback Score
    0

    Default Coldsteel Receiver Blank Center Punched Location Holes

    Hi Guys-

    I have worked out the problem with the locations holes being off on the blanks. My customers seem pleased with the results. Here is what Leper had to say:
    Quote Originally Posted by leper
    i sent my old cs reciever back to cold steel on 8 aug, a month and 2 hurricanes later, i recieved a beauty in the mail today. nice square corners, even surfaces, true, square, ect. thanks for the greatly improved product, and i would have no problem recomending one to anybody. thanks again
    or you can go to see what Chad Gassaway had to say about his replacement blanks http://www.akfiles.com/forums/showth...ight=coldsteel. I am always willing to help to correct any problems, I just need to hear about them.

    Coldsteel
    Last edited by Coldsteel; 09-14-2004 at 04:17 PM. Reason: To add information

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •