Tapco AK-T6 collapsible stock.
Results 1 to 3 of 3

Thread: Tapco AK-T6 collapsible stock.

  1. #1
    Gunco Regular Corpsie's Avatar
    Join Date
    Mar 2005
    Location
    L-town, MI
    Posts
    540
    Feedback Score
    0

    Default Tapco AK-T6 collapsible stock.

    The Tapco AK-T6 collapsible stock is all that and a bag of chips. Too bad the installation screws suck oh so horribly.

    Before installing it, go to the hardware store and buy a 10-24 x 2" phillips headed undercut screw and a matching wood-anchor (it looks like this except the screw goes into it, e.g. it's similar to a nut). Also, find a suitable replacement for the other screw.

    Follow the supplied instructions to drill the pilot holes.

    The 2" screw and anchor are going to be used to connect the stock to the rear opening of the receiver tang. Basically drill out the pilot hole straight down in the stock as small as will allow the 10-24 screw (shaft, not the head) to pass with minimal resistance. Grind 2 of the spike things on the anchor down until they are nearly flat. On the underside of the stock, drill the hole out larger so the inner-tube of the anchor will slide into the stock. Also on the underside, cut a small slot which will accomodate the remaining spike of the anchor. The slot will be near the hole toward the receiver side. You'll know what side I mean when you are looking at the stock. Use the screw and anchor to tighten the stock to the receiver. It is especially important to get a good fit here on an SAR1 otherwise the stock will drop down too low at or near full extension.

    Next, I'll write up how to use epoxy putty to "bed" the stock into the receiver for a super tight fit.
    It's innocent until proven guilty no matter how much you hate the present or future defendant.
    At 15.05 posts per day, can we really call Custer "Moderate"? - Bluedog

  2. #2
    Indian Admin Winn R's Avatar
    Join Date
    Feb 2004
    Location
    About 40 mi. north of Atlanta.
    Posts
    5,984
    Feedback Score
    18 (100%)

    Default

    Corpsie-- Thanks for the write up. I've wondered about these.
    There is no nonsense so errant that it cannot be made the creed of the vast majority by adequate governmental action. -- Bertrand Russell


    "Never attribute to malice that which can be adequately explained by stupidity." Robert J. Hanlon

  3. #3
    Gunco Regular Corpsie's Avatar
    Join Date
    Mar 2005
    Location
    L-town, MI
    Posts
    540
    Feedback Score
    0

    Default

    I love it because it's so much longer than the romanian buttstock. The extra length and adjustability work well with the Mojo ghost-ring sight I installed.
    It's innocent until proven guilty no matter how much you hate the present or future defendant.
    At 15.05 posts per day, can we really call Custer "Moderate"? - Bluedog

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •