Gunco Forums banner

AMD 65 Rear trunion question

1K views 6 replies 4 participants last post by  jh45gun 
#1 ·
Is it possible to just pin these and use the stock as a fixed stock. Figured I would make a piece of bent rod cheek piece like being sold to add to the rod of the stock. Figured that way I would not have to cut up the back of my Polish receiver either.
 
#5 ·
As for keeping it in the open position, just over tighten the screw that is the button or replace it with a shorter one. And this can be reversed if you want it to fold again.

The other option it to weld it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top