Page 2 of 10 FirstFirst 1 2 3 4 5 6 ... LastLast
Results 11 to 20 of 94

Thread: AK PDW Build

  1. #11
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default

    Russ milled down a block to my dimensions and I marked it out to make sure all my measurements were correct before going any further.
    Now it can go back to Russ again.



    The measurements I posted before have changed.
    I was able to shorten my block to 5/8 now and some of the measurement in my pics weren't correct.

    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

  2. #12
    GuncoHolic 2ndAmendican's Avatar
    Join Date
    May 2009
    Location
    Taylors, S.C.
    Posts
    4,808
    Feedback Score
    34 (100%)

    Default

    Cool build Kenny!!!! Keep posting!!
    Enforcement, NOT Amnesty!!!!!!

    "If they’re going to come here illegally, apply for & receive assistance through a corrupted Government agency encouraging this lawless behavior, work under the table & send billions of dollars each year back to their families in Mexico, while bleeding local economies dry, protest in our streets waving their Mexican flags DEMANDING rights, while I have to press ’1′ for English, then they need to be shipped back to where they came from!" -Chad Miller

  3. #13
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default

    Quote Originally Posted by 2ndAmendican View Post
    Cool build Kenny!!!! Keep posting!!
    Thanks buddy.
    I'll include as many pictures and measurements as I can. (I want to make sure the measurements are correct before I post them.)

    Glad I had my friends C53 here for repair. I took the HK trunnion measurements from it.



    The hand guard spacer will be 1/4 inch thick at the bottom and the radius will match the hand guard grip stop radius.
    (Going to use a 3/4 ball nosed cutter for this.)





    I'm also going to order a hand guard hanger from RTG http://www.robertrtg.com/store/pc/HK...EW-72p1938.htm
    (I'll heat the hangers metal strap and use a tapered line up pin to stretch the strap .040, so it slips over the Saiga gas block)
    Last edited by gwailo; 01-14-2014 at 12:35 AM.
    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

  4. #14
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default

    The O.D. of the Saiga gas block (where the gas tube hangs from) is. 0.705
    The I.D. of the Galil gas tube is. 0.675
    I need to turn down 0.015 material from the sides of Saiga gas block, so the Galil gas tube will fit on it.
    (I might just do this with a hand file). ???

    The raised casting on the top of the gas block (gas tube stop) will be removed.
    The HK hand guard support ring will sit flush with the shoulder and be the new gas tube stop

    P.S. When I cut down the HK front sight to fit the Saiga gas block, the front sight I.D. was too big.
    I just squeezed it a little bit at a time in my vise, till it fit snug on my gas block.

    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

  5. #15
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default



    Last edited by gwailo; 01-16-2014 at 02:22 PM.
    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

  6. #16
    White Cracker 4thIDvet's Avatar
    Join Date
    Oct 2006
    Location
    Swamp Florida
    Posts
    12,446
    Feedback Score
    17 (100%)

    Thumbs up

    Super nice. I like that.. Bit back a thread going on the short pistol builds. For ammo, Tiger ammo won hands down for the best flame..
    Super great work..
    "Man needs but two things to survive alone in the woods. A blow up female doll and his trusty old AK-47" - Thomas Jefferson 1781


  7. #17
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default

    Thank you.
    I don't have any Tiger ammo, but I do have almost 2 cases of Yugo 7.62x39.

    On to the next thing.
    The O.D. of the Galil gas tube body (without guide rails) is .940
    The valley of my Romy trunnion is .875 wide.
    I need to cut a notch and remove 0.0325 of material off both sides of my gas tube, so it will fit in the front trunnion valley.

    Last edited by gwailo; 01-16-2014 at 01:51 PM. Reason: Added info
    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

  8. #18
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default

    Gas tube is fit to front trunnion and rough cut to length. (Length will be figured out when hand guard spacer is finished)
    New M92 barrel showed up today also.

    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

  9. #19
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default

    I drew up a sketch of a idea I have for a new style "guide rod assembly".
    I know the other guide rod guns work just fine, but I might try something different.

    Last edited by gwailo; 01-17-2014 at 12:59 AM.
    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

  10. #20
    HART SYSTEMS gwailo's Avatar
    Join Date
    Mar 2008
    Posts
    518
    Feedback Score
    0

    Default

    I think I'll add a weld on full length on top rail, like Jeff did on this weapon.



    I sent turbothis a e-mail about getting a full length top rail made for my AK PDW.
    He said he could/would make one. No problem.






    .
    Last edited by gwailo; 01-17-2014 at 06:20 PM.
    HART SYSTEMS
    http://www.youtube.com/watch?v=evr_tP9cJWY
    Pull up your pants, turn off that damn rap and speak clear English, if you want to talk to me.

Page 2 of 10 FirstFirst 1 2 3 4 5 6 ... LastLast

Search tags for this page

ak pdw

,

ak47 gun holsters

,

c39 micro

,
c39 micro ak handguards
,

c39 micro handguard

,
c39 micro pistol handguard replacement
,

c39 pistol

,
foregrip for c39
,

micro draco

,
micro draco foregrip
,

micro draco handguard

,

micro draco pistol

Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •