Page 3 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast
Results 21 to 30 of 67

Thread: 9mm bullpup project pic.

  1. #21
    Loaner magnus392's Avatar
    Join Date
    Nov 2004
    Posts
    5,358
    Feedback Score
    6 (100%)

    Default

    I am doing and AMD bullpuppie too!!! My true hang up is the trigger mech and linkage...any suggestions or ideas? You 9mm Pup looks killer man!!!
    "It's all over but the cryin'!"Moonshiner


  2. #22
    Vis
    Vis is offline
    Gunco Regular Vis's Avatar
    Join Date
    Feb 2004
    Location
    Seattle
    Posts
    717
    Feedback Score
    2 (100%)

    Default

    hcpookie, It started as a barrel stub with trunion from K-var. I it was $14.95. I cut the barrel off at the RSB, and drilled it through with 5/8 drill bit. Then I reamed it out with an adjustable reammer to 16mm. I used my drill press to "turn" (don't try this at home, kids ) my barrel to a little more than 16mm. It's a nice press fit. I don't have a mill, so again I used my drill press with a machinist vise to "mill" my trunion. The trunion is'nt finished because I have'nt decided on what mags to use. I'd like to make my bolt removeable so I'm thinking about pinning it to the carrier just like a barrel is pinned to the trunion. Here's some more pics


    Here is my "mill and lathe in one "


    droog, The reason for not using a barrel blank is the cost. The uzi barrel you see in the pics. is only $19.99 at CDNN
    AK-47 user and abuser since 1980.
    http://strzelecka.net

  3. #23
    BattleRifleG3's Avatar
    Join Date
    Nov 2004
    Location
    Pennsylvania
    Posts
    217
    Feedback Score
    4 (100%)

    Default

    For my first post on this forum, you have my compliments!

  4. #24
    Vis
    Vis is offline
    Gunco Regular Vis's Avatar
    Join Date
    Feb 2004
    Location
    Seattle
    Posts
    717
    Feedback Score
    2 (100%)

    Default

    AK-47 user and abuser since 1980.
    http://strzelecka.net

  5. #25
    Happy Camper hcpookie's Avatar
    Join Date
    Feb 2004
    Location
    Colorado Springs
    Posts
    7,702
    Feedback Score
    3 (100%)

    Default

    Gotcha. Thanks for the pics. And yes I have a mill and a lathe

    I reamed out the RSB for my pistol project:

    ... and I like it so much I may use it when I make my bullpups. For the Bizon build it will take a "custom" RSB that's welded onto the trunion. Its small enough I could almost make my own trunion, but for $15 it is hard to beat that barrel section.

  6. #26
    Death Ray Operator vulcan762's Avatar
    Join Date
    May 2004
    Location
    Home...where I BELONG.
    Posts
    1,076
    Feedback Score
    1 (100%)

    Default

    One word. "Saiga"


    Quote Originally Posted by magnus392
    I am doing and AMD bullpuppie too!!! My true hang up is the trigger mech and linkage...any suggestions or ideas? You 9mm Pup looks killer man!!!

  7. #27
    Vis
    Vis is offline
    Gunco Regular Vis's Avatar
    Join Date
    Feb 2004
    Location
    Seattle
    Posts
    717
    Feedback Score
    2 (100%)

    Default

    So you guys don't think I quit, heres the progress of my build. Heres a picture of a carrier and bolt modified. I used AK 47 carrier that I sleaved to fit AK 74 bolt. The reason for that is I want a "press" fit. Later on I will pin them together. The charging handle is cut away to make room for the ejection port. The cam on the bolt is ground off.

    Here's a view of my mag well and barrel. I decided to use Sten mags after all.

    Hers another pic showing the magwell, carrier and bolt.

    Right now I'm working on a new receiver, magazine catch, handguard and a trigger linkage. I'll keep you updated.
    AK-47 user and abuser since 1980.
    http://strzelecka.net

  8. #28
    Indian Admin Winn R's Avatar
    Join Date
    Feb 2004
    Location
    About 40 mi. north of Atlanta.
    Posts
    5,939
    Feedback Score
    18 (100%)

    Default

    Vis--I'm in awe.
    There is no nonsense so errant that it cannot be made the creed of the vast majority by adequate governmental action. -- Bertrand Russell


    "Never attribute to malice that which can be adequately explained by stupidity." Robert J. Hanlon

  9. #29
    Administrator sniper69's Avatar
    Join Date
    Feb 2004
    Location
    Was Germany, now Ohio
    Posts
    6,675
    Feedback Score
    42 (100%)

    Default

    Quote Originally Posted by Winn R
    Vis--I'm in awe.
    What Winn said. It is looking very nice!

  10. #30
    RIP Sangrun Hunter's Avatar
    Join Date
    Feb 2004
    Posts
    12,413
    Feedback Score
    28 (100%)

    Default

    Really cool and it looks like you are not to far away from a test fire?

Page 3 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •