Here are some pics of my Yugo RPK build. It is a CFS pinned, milled kit. It is built on a Vulcan rec(what a pain in ass!).It took a little more fitting but it functions great. I used an M70AB2 front trunnion and the milled down original rear trunnion. The headspace was off slightly, so I set the headspace and drilled the pin hole slightly oversized. Since I used a rec. with recoil rod retaining pin holes, I installed false pins in those locations. I wanted to keep the orig grip so I put a US made slant brake on in place of the muzzle nut. Took it out yesterday to get it sighted in. The bore is somewhat worn therefore groups werent very tight, 3-4 in groups @ 50yds but this is just a shooter for fun so thats not a real concern for me. Total cost for this build came out to $270.
"Courage is being scared to death - and saddling up anyway." - The Duke
Very very nice. I hope mine looks as nice when I have time to finish it.
Nice job, looks great. What did you use on the stock and H/Gs to get them looking like new? Paul
New World Order Money (AMMO)
Sitting on a rock in the middle of the Pacific ocean..