Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: AK74 Underfolder

  1. #1
    Gunco Regular akblue's Avatar
    Join Date
    Mar 2011
    Location
    Columbus Ohio
    Posts
    771
    Feedback Score
    0

    Default AK74 Underfolder

    I have been working on a AK74 underfolder for a while. Finally got some good weather to apply and cure the KG GunKote.
    Only test fired for function so far in the cold/wet. Hope to get to the shooting area soon.
    I took my time fitting and assembling the underfolder fit to trunnion and receiver. It is very snug and feels good. Several assembly/disassembly cycles to get it to lock up tight and not bind the locking lugs. I like the sidefolders but the underfolders are nice too.

    Nothing real special., but I wanted one to add to the 74 group>



  2. #2
    GuncoHolic Sprat's Avatar
    Join Date
    Feb 2005
    Location
    Florida
    Posts
    3,715
    Feedback Score
    5 (100%)

    Default

    nice build, what type of kit Bulgy??

    love those under folders, I once had a 223 norinco underfolder.
    Sprat and sprat1 are one and the same.

  3. #3
    No Hope For Me Coils's Avatar
    Join Date
    Feb 2005
    Location
    PA Where the Amish Roam Free
    Posts
    14,039
    Feedback Score
    38 (100%)

    Default

    That came out nice

    I wish I would have gotten more of the 5.45 cal models when they were around too, only got the Saiga
    "Government is not the solution to our problem, government is the problem" Ronald Reagan

  4. #4
    GuncoHolic 2ndAmendican's Avatar
    Join Date
    May 2009
    Location
    Taylors, S.C.
    Posts
    4,763
    Feedback Score
    34 (100%)

    Default

    Looks great Blue!!!! I like the way that turned out.
    Enforcement, NOT Amnesty!!!!!!

    "If they’re going to come here illegally, apply for & receive assistance through a corrupted Government agency encouraging this lawless behavior, work under the table & send billions of dollars each year back to their families in Mexico, while bleeding local economies dry, protest in our streets waving their Mexican flags DEMANDING rights, while I have to press ’1′ for English, then they need to be shipped back to where they came from!" -Chad Miller

  5. #5
    Gunco Regular akblue's Avatar
    Join Date
    Mar 2011
    Location
    Columbus Ohio
    Posts
    771
    Feedback Score
    0

    Default

    Quote Originally Posted by Sprat View Post
    nice build, what type of kit Bulgy??

    love those under folders, I once had a 223 norinco underfolder.
    Thanks.,
    Pre-panic Bulgy barrel-less kit (Desert Fox). USA chromelined virgin barrel.

    I almost used an original Bulgy kit & barrel but decided to use the barrel-less and hold onto the original AK(S)74 kits for a while yet.
    I purchased the receiver and Polish underfolder assembly with trunnion from an on line seller at a gun site for $135 right around November., so it was a no brainer build from that point.
    I always had a plan for a AK74 UF but when NDS was out of receivers I put it on hold.
    Though I have cut standard receivers for the folder too.., but when this came up on the WTS with the reinforcing plate etc., I snagged it.., for the build.

  6. #6
    Gunco Regular Ken3030's Avatar
    Join Date
    Sep 2011
    Location
    South Central Louisiana
    Posts
    647
    Feedback Score
    0

    Default

    Nice! I like the underfolders. Working on another mutt UF now.
    “The very atmosphere of firearms anywhere and everywhere restrains evil interference- they deserve a place of honor with all that is good.” George Washington

    "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government."
    George Washington

  7. #7
    GuncoHolic Sprat's Avatar
    Join Date
    Feb 2005
    Location
    Florida
    Posts
    3,715
    Feedback Score
    5 (100%)

    Default

    again nice

    I got a old global trades polish under folder i am going to put together next. just getting a little fresh air
    Sprat and sprat1 are one and the same.

  8. #8
    Gunco Regular rigore's Avatar
    Join Date
    Oct 2005
    Posts
    685
    Feedback Score
    6 (100%)

    Default

    Nice work, as always!

  9. #9
    Citizen, Patriot, Ranger bellson's Avatar
    Join Date
    Dec 2005
    Location
    Peoples Republik of Kalifornia
    Posts
    2,627
    Feedback Score
    7 (100%)

    Default

    Now that is a very nice Rifle! I'll Take 10 in .223, with 25 Mags Each. Can I get those next week? Kinda expecting the EOTWAWKI.....Oh, and 10,000 rounds per rifle of course....You can throw that in just because I'm a nice guy, right?????

    Seriously, That is a very nice looking rifle. Please take the time to shoot it at 200 or 300, and post a pic of the target. I do not want to snicker at you or your rifle, I just want to see what it can do in a "normal" shooters' hands.

    Regards,
    Imagine whirled peas

    Peace, Love, And Superior Firepower






    Bellson

  10. #10
    GuncoHolic Tommo's Avatar
    Join Date
    Mar 2004
    Posts
    3,018
    Feedback Score
    3 (100%)

    Default

    Looks great, thanks for the pictures.

Page 1 of 2 1 2 LastLast

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •