View Full Version : 1919 Bucking bar plans
12-08-2006, 10:22 PM
Hey all.. I'm getting ready to do a 1919a4 build, and am looking to make some of my own tools.(cause its more fun)
I'd like to make my own bucking bar, like this one:
But am unsure of the dimensions. The seller says its 3/4" thick stock, and 11 in. long, but I'm unsure of how wide it needs to be. My guess is approx. 2.25 inches.
I'm planning on cutting it diagonally with cutting torch then having my buddy clean it up on his mill.
12-08-2006, 10:52 PM
here is what you need for $20.00
12-08-2006, 11:14 PM
I enjoy making my own tools also. But I have found it much more effecient to just buy the tools of a proven design from a respected maker. Do the work and then re-sell the tool. Since quite often, custom home building tools are backordered.. I usually get more than I paid for the tool in the first place. Folks will pay to get it RIGHT NOW. Plus if it's a tool you want to keep around. Buying a pro built one gives you an oportunity to copy it & re-sell the original.
Like Pirates tool........I have no doubt you could use it and get most if not all or more of your money back. Once I get my Brens welded up..I'll dump that $300.00 jig ASAP!
12-09-2006, 03:29 AM
Stan -- That's a beautiful site.
12-09-2006, 08:46 AM
Stan -- That's a beautiful site.
12-09-2006, 12:19 PM
very nice site Stan...I am impressed.....
12-09-2006, 04:20 PM
12-09-2006, 07:21 PM
You are certainly Welcome !
12-11-2006, 05:42 PM
Awesome Pirate, I've seen part of your site before, but this has some great small details and close-up pics that Lobo's 1919 tutorial on 191a4.com skimmed over. Very helpful and well presented.
And Bradrock, you hit the nail on the head..I wanted to get something going quickly on my project as opposed to waiting for more goodies via the mail. Sourcing the stock locally is no problem and no waiting.
12-11-2006, 09:27 PM
I made a simple one with a 5" fixture wedge cut in half and some 1/4" flat bar.
12-12-2006, 08:38 AM
Frank -- your gadgets constantly amaze me!
12-12-2006, 08:46 AM
Ok, for the 1919 ignorant of us could you show how its used? I have an aquaintance of mine that is into building a 1919 so I've been hooking him up with what I can find on the build....
12-12-2006, 06:41 PM
Check out this page, third picture down -
12-12-2006, 11:56 PM
Here is a picture of one of these being used. There are some other photos in my picture gallery.
12-13-2006, 04:49 AM
Thanks for the info guys!!!!!!!!!!!!!!!!!
12-13-2006, 04:52 AM
got another question. Does anybody have pics of the semi and full parts?????
12-13-2006, 10:16 AM
I used a KMP SA trigger/sear in mine. They are the most popular, kind of the G2 of the 1919 world.
There is a pic on their site.
12-13-2006, 10:17 AM
That bucking setup is sweet, I wish I had one of those when I built mine.
12-13-2006, 02:19 PM
Thanks for the info, your the man!!!!! So, any pix on the difference between semi and full fun; or a link to the info.
12-14-2006, 04:48 PM
I could use all the info too. My kit came in a few days ago. I am assembling pieces for a build too. I read projectguns.com info. Makes it look easy.
12-14-2006, 07:57 PM
Below is a diagram of the required internal modifications:
And for sure printout a copy of the Build sequence checklist found here:
12-15-2006, 12:46 PM
Just wanted to say "thanks" for pointing me in the "right direction"