View Full Version : AK Bullpup
12-14-2008, 10:39 PM
Built this one a while back. Romy w/ Bulgy .223 bbl & bolt, euro .223 mag, upper handguard w/ rail,riser & cheap red dot. AMD65 brake and lower handguard. Homemade buttstock. Shoot me light & vert. grip mounted on bbl clamp type rail mount. Not a very good photo, good cam battery dead.
12-15-2008, 12:07 AM
Nice!! It is very similiar to my Bulgie 5.45 AK-74 Bullpup.
I used a spare AK stock to make my home made stock. It works. I plan on installing a laser on the barrel, but haven't gotten around to it yet.
12-15-2008, 12:23 AM
Nice! Bet it handles quick!
12-21-2008, 03:14 PM
Handles quiker than spit and accurate at least to 100 yards(thats as far as I have shot it). I was pleasantly suprised at how little the bullit dropped compared to 7.62x39.
12-21-2008, 03:18 PM
Shadow, do you have pics of yours?
12-21-2008, 04:01 PM
Would love to see pics or drawings of how the trigger linkage is arranged!
12-21-2008, 05:35 PM
Unfortunately I don't have the ability top post or send pictures.
Zoom6zoom, I used stock 12 inch spring wire as linkage for my Bullpup. Use the distance between trigger pins ( center to center) as the distance for the main 90 degree bends. Then make a second bend at each point back to straight.
Think of it as the route for a trip. You drive a short distance, turn left, drive a short distance, turn right........drive about twenty miles (this will be the distance between pins) , turn right, drive a short distance, turn left, drive a short distance and stop. That is the shape of the spring wire.
I drilled a hole in the top of each trigger, I countersunk each hole. The countersink allows you to insert the spring and align the spring. You can do this with the trigger in the receiver, but you have to remove the front trigger in order to insert the spring.
BTW, the spring goes under the front trunnion.
Mtdew, excuse me for borrowing your thread.
12-26-2008, 02:22 AM
Not a prob shadow. I also used spring wire,but I ran it on the left outside of the rec. w/ a raised side plate to protect it.
12-26-2008, 12:15 PM
That is very ice man. I like it!! I wouldnt know where to start building that baby!
01-01-2009, 11:15 AM
nice, looks like the ones the chinese military used a couple of years ago
01-10-2009, 08:17 PM
how about some closeup/detail photos please
01-10-2009, 08:31 PM
mtdew, I ran my trigger wire under the front trunnion. There was no problem doing it this way.
You might be able to see pictures by doing a search on AK-47.net ™: #1 AK site on the web (http://www.AK-47.net) in the build-it-yourself site.