View Full Version : cobra sight
03-30-2009, 02:25 PM
how do you put the sight on the side mount. it didn't come with instructions and i can't figure it out
03-30-2009, 05:14 PM
Russian Optics Clamp Adjustments (http://tantal.kalashnikov.guns.ru/pso/clamp_adjustments.htm)
Kobra Sights-Tantal's Collector's Source (http://tantal.kalashnikov.guns.ru/bstkobra.html)
03-31-2009, 04:46 AM
ok. Thanks. I got it mounted. And I had to adjust the dials all the way to the right and to the top. I even took the lock nuts on the dial off and adjusted the screw all the way. and it still seem like it needs to go more. has anyone had this problem before?
03-31-2009, 08:58 AM
Kobra Zero Procedures (http://tantal.kalashnikov.guns.ru/kobrazer.html)
03-31-2009, 10:45 PM
I did all of that. I have it far as it will go to the right and the it lines up about in the middle. But it is far as it will go up and still needs to go more. I think the sight might have been dropped or the laser is messed up or something.
04-01-2009, 10:43 AM
Or more likely the sight rail is not 100% aligned with the barrel. I had that problem on my PSL and had to remove and reinstall the rail. NOT FUN.
You can probably get away leaving the rail alone and shim the sight mount with a sliver of a trimmed soda can. "needing to go up" sounds like you should shim the FRONT of the sight mount.
My ORF AKS74 has a rail installed by them. The rifle is great but the rail is soo crooked I can't get my kobra to zero. It needs to be removed and reinstalled. Thx-Ace