View Full Version : Anyone make a warrenty claim for a saiga 12
05-25-2009, 10:22 PM
Hello Anyone here have made a claim for a defect in a saiga 12 shotgun with Russian american armory? I would think they would honor a warrenty repair for a problem. Thanks IRONMULE
05-26-2009, 02:30 PM
Lemme guess. It won't cycle.
05-26-2009, 04:08 PM
My Saiga 12 cycles good with all ammunition I used. I see my 19 inch barrel has 3 gas port holes for recocking, it works well. The older Saiga 12 had two ports that those don't work with light or trap loads.My three gas port barrel shoots the light trap loads from Walmart just fine. I have a defect.I have a cross pin exposed inside the bore next to the 3 gas port holes. I see that the gas block has been drilled and pinned into the inside of bore, the pin has a hump which my shells are clearly hitting, just like a speed bump on the road. I can't believe this. I emailed Russian American Armory Company about this defect on Monday which was holiday, by Tuesday morning I got email reply quickly and instuctions to ship gun for warrenty work to Cadiz Gun Works. I was told about 20 to 30 days turn around time.I'm happy with the service so far. IRONMULE:thumbup1:
05-28-2009, 09:10 AM
I only had one instance when Mine didnt want to cycle, but I think it had more to do with the mag??
A few months later, I loaded up some trap loads and mag dumped all 10 of them, no probs?
06-05-2009, 02:58 PM
That's the 2nd one I've heard of with a pin that entered into the bore. Interesting.
06-05-2009, 10:31 PM
The factory must have had the machines off specs for drilling the gas blocks. Everybody with the Saiga 12 should look inside the bores and be sure you don't have a pin exposed inside the bore. Warrenty will cover that.I think many people have cycling problems cuz they may have two gas port holes in barrel instead of three gas port holes.My friend had two ports in 19 inch barrel instead of three port and he can't cycle the lite loads.I hear that three gas port holes is correct for 19 inch barrels and two gas port is for 24 inch barrels.Warrenty will cover the error in gas ports. It doesn't hurt to look in barrel and see what you have then have it corrected.IRONMULE
07-23-2009, 05:21 PM
You got one of those "Vodka" specials. I was told that a small production run got mistaken with the rifle set-up which is why it got 2 ports instead of 3. Cadiz Gun Works is the official warranty repair shop for all RAA Saigas. Yours is not of the few. There have been many.
For others wondering, the older guns use to have 4 small ports. This later got updated into 3 larger ports. However the problem ones were the guns that got 2 ports. So if you find you only have three, don't panic, its okay.