I had a good experience with some kydex and wanted to share. well, I picked up S&W M&P( with the Apex comp kit- awesome!) and I had a Comp-Tac IWB in kydex for a Glock 23 that I once had, so I decided to try and remold it to the M&P.
After some research online I went ahead and it turned out perfect.
One person who makes kydex holsters uses a 2 ton press and takes 2 pieces of wood and glues a foam mat onto them and heats the kydex and wraps the item( knife or gun) and then places them between the wood and presses them with the press, to make a perfect molding.
Well, I don't have a press, so didn't want to make the wood/foam thingy. After some contemplating and figuring the foam density, etc, I decided to use two phone books. They worked perfect.
So, heat the kydex to 300 deg F, not more then 350deg( I used a toaster oven). Heat several minutes until pliable. Place gun in holster( or wrap kydex around item) and place between two phonebooks and stand on it( I'm 200lbs) for a minute( until holster cools) and presto chango, a Comp-Tac iwb holster for a S&W M&P. Perfectly formed to the pistol.......
__________________
Freedom comes from those who fought for it.
USMC, GoA Lifer, NRA, IDPA SO, Florida Cracker
Awesome job. I have made Kydex sheethes and Magazine Holders in the past and am looking to get back into it. The materials are extremely cheep. Instead of standing on it I used the wood and foam trick but used clamps and vice grips to press the two boards together. Then used a hair dryer to heat the finnished product to forn the "wings" to create a tighter fit to the body.
Also love the M&P. I have one I set up and replaced all the innards with the APEX setup. Once I stop being lave iI'm going to do the AEK trigger on it.
__________________ "What country can preserve its liberties if its rulers are not warned from time to time that their people preserve the spirit of resistance?" -Thomas Jefferson- To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
"The whole of the Bill (of Rights) is a declaration of the right of the people at large or considered as individuals.... It establishes some rights of the individual as unalienable and which consequently, no majority has a right to deprive them of." (Albert Gallatin of the New York Historical Society, October 7, 1789)
Cool, yeah if I was to get into it on a regular basis, I'd invest in a press and jig......I'm usually old school and prefer leather( my 1911s rest in leather), but the M&P feels more at home in kydex and the Comp-tac I had laying around is a good platform. I work in leather and wood , so this is a good medium for those who like to work with their hands. I was really inpressed at how easily and completely the kydex formed to the pistol. Luckily my body weight was enough this time.
Ditto on the M&P, very well could be the best handgun I've ever owned now( and I have a hand fitted, all forged parts, on a Caspian frame and slide, 1911)... the Apex comp pkg makes the trigger as close to SA as any could get and the reset is barely noticeable. I'll wear this trigger out and then get the Apex aluminum one.
__________________
Freedom comes from those who fought for it.
USMC, GoA Lifer, NRA, IDPA SO, Florida Cracker
Where can I find Kydex that doesn't cost as much as the finished product? The prices for a 1foot square piece on Ebay is as much as I pay for hog.
Hunter
Tandy Leather has kydex. I just bought some for a repro of a galco king tuk. I need the forming foam to complete my homemade press, i.e. plywood, foam, and clamps.
Where can I find Kydex that doesn't cost as much as the finished product? The prices for a 1foot square piece on Ebay is as much as I pay for hog.
Hunter
[Only registered and activated users can see links. ]
This is where I got mine when I was heavier into it. This thread has re-sparked my interest though. Thanks alot GeneC. Now my wife has to deal with me using the oven all day doing this again.
__________________ "What country can preserve its liberties if its rulers are not warned from time to time that their people preserve the spirit of resistance?" -Thomas Jefferson- To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
"The whole of the Bill (of Rights) is a declaration of the right of the people at large or considered as individuals.... It establishes some rights of the individual as unalienable and which consequently, no majority has a right to deprive them of." (Albert Gallatin of the New York Historical Society, October 7, 1789)
[Only registered and activated users can see links. ]
This is where I got mine when I was heavier into it. This thread has re-sparked my interest though. Thanks alot GeneC. Now my wife has to deal with me using the oven all day doing this again.
LOLOL....glad I could help.
__________________
Freedom comes from those who fought for it.
USMC, GoA Lifer, NRA, IDPA SO, Florida Cracker
ran into the same issue. wanted to do about 6 holsters. the 12x12 were pricey. found a dealer in jax fl and got an 4'x8' sheet for $75
Quote:
Originally Posted by hunter_02
Where can I find Kydex that doesn't cost as much as the finished product? The prices for a 1foot square piece on Ebay is as much as I pay for hog.
Hunter
__________________
al gore is full of carbon enriched shit
Molding Kydex
Linear Mode
