Yep; I remember seeing them made from layers like a sandwich, or padlock like
Let's just do a group buy on one of them there 3-D printers.. Heh....Heh
Oh.........The HUMANITY!!!!! Oh My!!
I checked have ben checking these out online and the prices are wideranged from 599 and up too, several grand ialso had ead somewhere that some machines can do boith plastic and some sort of metal parts as well. I'd love to see this work. now just a for a second. ATF regulations state that you can make your own single shot pistol, rifle , or even semi autos , however this dose not allow you to manufacture and sell firearms.as a bussiness. now you caould make your own receiverds , if this wored well enough, I'd start with low cal and work my way up. now as far a as pistol frame, look many that are now being manufactured is polymer, I think it would be a good try
and its alot cheaier than a CNC machine, of course Ive havnt tried looking for used ones worth a shot the for the home hobbiest, maybe even for the guy just starting out too....Doc
[Only registered and activated users can see links. ]
you know a sheetmetal ar upper and lower could well be doable even some of the ninjas are looking at the project.
i would like to do one with a sheet metal upper as well. it could be made from steel tubing i am thinking.
there is nothing really critical in the AR-15 aside from the bolt carrier group and the barrel assembly. the rest could be built on the fly.
the DOD adopted the m15 for this very reason. they wanted to out source the parts to hundreds of small facilities just in case of WW3, there would be a few surviving small shops turning out parts for the m16.
sort of the ?dispersal under fire" concept.
this being built into the design leaves many things open for substitution.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Has anyone been working on this since we all talked about it?? I know I had sent the file (limited though it may be) to a bunch of folks. I have some materials, but I just haven't had the time to work on it. I would love to get one or more bending jigs made, like what is shown in the file, and then send them around to everyone kind of like AK jigs in the old days. Or preferably find a shop willing to make a "builders kit" with all of the main parts, pre-bent, as well as the block for the rear of the magwell, the buffer tube ring section (already threaded) and all the little tabs already cut and drilled, where all that the builder needed to do would be to hand fit the parts and weld. I wonder how expensive that would be if we could find someone to make say 20 "kits"?? (I may have already said all this earlier in the thread, as it sounds familiar as I'm typing, so sorry if i am repeating myself.)
__________________ Enforcement, NOT Amnesty!!!!!!
"If they’re going to come here illegally, apply for & receive assistance through a corrupted Government agency encouraging this lawless behavior, work under the table & send billions of dollars each year back to their families in Mexico, while bleeding local economies dry, protest in our streets waving their Mexican flags DEMANDING rights, while I have to press ’1′ for English, then they need to be shipped back to where they came from!" -Chad Miller
Also, I like 427's idead of a "bolt on" magwell, depending on the caliber. That would definitely make things more interesting.
__________________ Enforcement, NOT Amnesty!!!!!!
"If they’re going to come here illegally, apply for & receive assistance through a corrupted Government agency encouraging this lawless behavior, work under the table & send billions of dollars each year back to their families in Mexico, while bleeding local economies dry, protest in our streets waving their Mexican flags DEMANDING rights, while I have to press ’1′ for English, then they need to be shipped back to where they came from!" -Chad Miller
Also, I like 427's idead of a "bolt on" magwell, depending on the caliber. That would definitely make things more interesting.
for the record not my idea--
seems like MGI had one years ago and i may have seen that "top secret" ass-pukastan special 5.56/5.45 convertable lower that takes ak74 mags OR m16 mags with various blocks.
today there are mags for the soviet ammo soo--
what i want to do is an ar--but with a longer mag-well so you can get a longer length round in there.
a longer 6.5g opens up some "interesting" possibilities reloading wise--LOL--
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
back a few years ago you could get a cut up ar-180 rifle as a kit. i wish i had bought some just for giggles.
numrich might have a few parts --though i doubt they got any uppers for the 180/18.
i am seriously considering doing a sheet metal ar-15 lower if for no other reason just the 1-off it would be.
and with the ar-15 stripped lowers with $800 asking prices??--LOL!
there has got to be a better way!
There is always a better way to build a miuse trap or in this case a firearms receiver. if they could be made to a 80% complete, and other machienest made othe parts I wiould thing that the price may be able to be reduced. Just a thought, this way people on here that are interested can purchase a part form each other, the receiver is the only part that currenty requires a FFL License, but if it the receiver is only 80 % done to where ATF considers it a paperweight, and all other parts are semi auto there is no propblem selling them with the exception of overseas and to the states that have violated the second amendment, NY CALI ETC. what do you think and it also a great way to make some moolaw for other projests...Doc
Re 3d printerrs
Linear Mode
