Gunco Forums banner

RPK Finished...

567 views 6 replies 6 participants last post by  Gunco 
#1 ·
Well I just finished another build.
A Romanian RPK. The kit was pretty rough. It was in nasty shape with some pitting and rust everywhere. I had to drill out the barrel pin. I bent the barrel trunnion trying to press the barrel out. I broke the rear sight. I had to stripped the barrel of its components to refinish it. I had to drill out most of the pins.
The receiver is a DCI. I stripped the wood clean. I did a custom stain & refinishing of the furniture. It was also parkerizing by me.
This was a tough one and a lot of work, but I like the final results....
Air gun Trigger Wood Gun barrel Gun accessory


Air gun Trigger Gun barrel Shotgun Wood
 
See less See more
2
#3 ·
SWEET!
Looks like you have Australian pines?
Our yard had those needles about 3 foot thick after Hurricane charley, Ivan, Florence & 1 more I can't remember!
 
#4 ·
Bradrock said:
SWEET!
Looks like you have Australian pines?
Our yard had those needles about 3 foot thick after Hurricane charley, Ivan, Florence & 1 more I can't remember!
All the Australian got blown down...all thats left at the slash pines...all in all I lost 30+ trees...from Frances, Jeanne & Wilma....:frown:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top