What is the diameter, thickness and length of the barrel shroud?
What is the diameter of the barrel?
Can someone post a pic of the exterior shape of the receiver. (I found a few but not real clear)
What are the diameters of the cooling holes in the barrel shroud?
OA length: 22 15/16"
Front of rec. to rear ofbooster/bipod mount block: 20 1/2"
Front of rec. to start of perforations: 7"
Perforated tube section: 13 1/2"
Booster/bipod mount block: 2 3/8"
Cooling hole diameter: .550"
Large rear portion of shroud tube OD: 1.650"
Main shroud tube section OD: 1.489"
Approx. wall thickness rear: .187"
" " " mid section: .088"
" " " front section: .065"
The Barrel:
OA length including the extension: 24 9/16"
Dia. at the muzzle, straight turned approx. 4": .851-.852
Steps up here to: .868"
Tapers back to the straight turned area of 2 1/2" 1.099-1.100"
If you don't find any suitable pictures, post back here and I will take some of my TNW and e-mail them to you. Can't get it done today, but can do it on the weekend.
If your looking for a print for the 34 you can get one here http://www.landsden.com/ click on the products and services and it will take you to a page that will have prints on the listing and you will see when you scroll down a print for the mg 34 the price is 15 to 20 bucks depending on the size hope this helps you out
Ok now I need the heigth distance from bore center line to feed tray where the round sits ready for stripping. And the distance from breach face to bullet tip as it sits in the tray ready for stripping. Anyone? And receiver width flat vertical side to flat vertical side.
Please be aware that these are not, "exact" dimensions by any means, approximately accurate to with in one minute of digital caliper and steel ruler, maybe, sort of.
Tip of round to barrel chamber face: 2.045"
Feed tray surface to bore centerline: .480"
Width of receiver, flat to flat: 1.975"
Thanks! Just trying to get some ideas, gears are turning, smoke is rising.....
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Gunco Forums
772.5K posts
34K members
Since 2004
A forum community dedicated to AK-47 and AR-15 firearm owners and enthusiasts. Come join the discussion about optics, hunting, gunsmithing, styles, reviews, accessories, classifieds, and more!