BUILDING A NEW VARMIT AK.
I am in the planning stages of a new 223 varmit build. The varmit II will be an all out attempt at out doing my previous build. I am starting to collect parts and think about how I want it. I bought a match grade, benchrest barrel in 1in 9 twist. This barrel is beautiflly machined it almost seems a shame to cut the threads off it. the thight chamber is possably going to cause feeding issues as well it will require neck turning of quality brass . I am going all out on this build. match barrel, heavy wall reciver, yugo trunion. heavyer scope mounts, milled drop out trigger group that is eaiser to adjust. possably a second trigger group that is set up for singleshot only in the 1 pound or less range the trigger group will also have larger more percisian pins, push button saftey, left hand charge handel so shell catcher wont hit or be in the way, longer mag well an custom mag so I can seat heavy bullets further out like the AR guys do in 1000 meter compition but mine will not have to be hand feed, aluminum float tube fore grip, adjustable muzzel brake (possably if accuracy will not be affected), aluminum gas block with stainless linner and a shut off, also looking at smaller, lighter firing pin posabilitys and a some way of reducing the lock time on the hammer as well. the stock is up in the air but I want a quick adjust rear rest on it and a way to add weight. I am thinking a custom dust cover that will allow easier removel with a even lower scope. I want to get the scope as low as possable to the barrel. it will be a while before it is done but I will post pics unlike the last build. I aqm posting this in the calibur conversion section because It will be on a 7.62x39 kit and parts. the bolt will be Kvar bulgy.
are there any threaded trunions for a stamped reciver out there avaliable??? was there even such a animal? was thinking a threaded barrel wold be a good idea as it will not have as much stress and tension on it. I am thinking of finding some place were this thing might be competive in a class against AR15,s. I dont compete in rifle shoots but might like to try. maybe 1000 meter or WHAT?? any compitition shooters out there. also looking at a 22 PPC barrel as well.