trust me its how you came off. and for the record your correct i dont know what you do for a living and for that i apoligize. however saying that obeying the law is not going to be important because you know the future is a little over the top.
I'm not here to flame or troll--but with a simple question I get flamed and trolled.
Well unless you think there is going to be no more America ( and you may be right) then 922r laws will be even more important. IMOO thay will enforce the law even more now that the current administration is in place.
And in a about a year if this economic implosion goes the way I think it will... this 922r thing will not be a concern to anyone, anymore.
I suspect im pretty well known here and on other boards, and in person in the gun comunity. with almost 3500 posts here alone. I have never managed to put so many people on guard and learyof myself as you did in 5 posts. you might ask yourself if its not how you asked or how you replied . I dont see the other thousands of members having this issue. you may be a member here for a year but as stated no one knows you in 5 posts. for all i know you might be the smartest guy on the net. but it takes time. also under stand that there are trolls here from time to time so were all on guard and watch each others backs. I never said or felt you were a troll. in fact i asked you to show some pictures so we can help you with your question and see your work.
Jeeze, and no one knows you!
your the one that threw this out there indicating that you dont care about it. it also gives members here a sence that you may not really be compliant. or that you dont care about it. yes you said you were compliant but at the same time you were asking about three countable pieces used by most not all to stay compliant.
And FYI no one has ever been cited for 922r--or even harrased to my knowledge.
it was your statment about no one checking for n922 parts and enforcing it that put you on the radar. to many guys are preaching that these days. it is not true.
Just for the record how did you become compliant? I assume you still have a imported trunion, barrel, reciver,bolt. this leaves you with a pistol grip, stock, gas piston , forearm and three mag pieces and three trigger pieces to play with and possably a muzzel attachment. you stated that you still have the original trigger so those are out. you made your own parts . what did you make stock, piston, pistol grip, mags??? if you made all or some of this trust me members would love to see your work. do us all a favor and post some pics.
And I think someone answered my question somewhere above.
Now with a simple question regarding a trigger job--I get a load of yammering!
I felt i gave you really sound advice. I do alot with trigggers on AK,s and if you have questions I am still willing to help. lets starts over. have you or are you conveting to pistol grip??? that is the info needed to properly answer your question. you asked if you candrop a standard AK trigger group into a saiga correct. you di noit however say it was converted or what mods you had done. you went into more detail as to how it was 922 compliant this brought up sever questions in my mind 1. is it a converted to pistol grip. I assumed it was but you never stated it. 2. since you were asking these questions it made me wonder if you really knew the compliance laws. most guys who know how to do a conversion also kniw tht a standard ak trigger and guard can be made to work since you dont is makes me and likely others wonder about you and your buid. dont take this as a slam just use it to under stand were myself and likely others are coming from.
NOW AS FAR AS YOUR ORIGINAL QUESTION. I AM NOT SURE IF YOU HAVE CONVERTED TO A PISTOL GRIP OR NOT. IF YOU HAVE NOT THEN ADDING A REGULAR TAPCO WONT WORK. IF YOU ARE GOING TO CONVERT TO A PISTOL GRIP THEN YES A TAPCO WILL WORK. HOW EVER REPLACING A STOCK TRIGGER IN A NORMAL AK WITH A STOCK TAPCO REALLY DOSENT GIVE YOU A IMPROVMENT. I ASSUME THAT YOU ARE DOING A CONVERSION TO PISTOL GRIP SINCE YOU HAVE ASKED ABOUT USING A AK TRIGGER GUARD. IF YOU DO TRUELY HAVE A SAGIA WITH ENOUGH COMPLIANT PARTS TO NOT NEED USA MADE TRIGGER PARTS THAN BUYING A TAPCO WILL NOT DO ANY THING FOR YOU IN REGARDS WITH TRIGGER QUALITY.
YOU USED THE TERM TRIGGER JOB THAT NORMALY EQUATES TO IMPROVING TRIGGER FEEL,AN QUALITY. THIS IS ACOMPLISHED WITH FILEING AND POLISHING AND ADJUSTING PRE AND OVER TRAVEL. IT TAKES CONSIDERABLE SKILL AND PRACTICE. DONE WRONG CAN BE VERY DANGERIOUS. MY BEST ADVICE IS TO BUY A RED STAR ADJUSTABLE FOR AROUND $75 IT IS MONEY WELL SPENT AND IS LIKELY THE BEST SINGLE IMPROVEMENT YOU CAN MAKE TO A AK AS FAR AS IMPROVING SHOOTABILITY.
DO A SEARCH ON TRIGGER WORK I HAVE POSTED A LOT ON IT.
But there really is no outlet or place for this type of discussion on gunco, well none that I can find anyways.
And I don't think it's really the place to discuss it.
you would likely be more than welcome to express you views and opinions of the current finacial situaation in the general discusion fourm on this site. the area is full of talk on the subject.
I again apoligise I dont know what your back ground in finace is. how ever you really need to be carefull in advising those on whats being enforced and not. IMOO its best to assume they are going to enforce it. as i statd I have been checked for compliance parts i was legal so no I wasnt in trouble but belive me they would have consficated my gun had it not been ok.
I DOUBT YOUR A ECONOMIST OR A FIRE ARM LAW EXPERT AND CERTAINLY NOT A AK EXPERT OR YOU WPOULD NOT BE ASKING YOUR ORIGINAL QUESTION. SO SO TAKING YOUR ADVICE WILL LIKELY BE A BAD IDEA!!.