WTS: Polish AKM, AK-47, AK-74 receivers $68
Base price of $68
These will fit all fixed stock AKM and AK-74 kits.
The center support holes are drilled, but the center support is not installed. This will be offered as an option for $10 (I provide and install the center support).
Custom serial number engraving ($15).
Custom Serial Numbers:
Must be Roman letters (A,B,C) standard Numbers (1,2,3)
Must include at least one number (Not all letters)
Must be 4–14 characters including dashes and spaces
If your custom serial number is not available, we will contact you for an alternative.
We start with a Polish blank and a set of rails from the Radom factory.
All holes are machined using CNC to insure accuracy.
The receiver is heat treated in our salt bath to 40 HRC.
Each receiver has the following completed:
Top rails trimmed
Mag well trimmed
Lower rails spot welded to receiver
Holes machined for:
Trigger guard rivets
Fire control group
Front and Rear Trunnion rivet holes are not machined.
Ejector tips will need fitted to your bolt (Easily done with a file).
Everything from Poland except the holes!
This receiver requires an FFL transfer.