Page 1 of 4 1 2 3 4 LastLast
Results 1 to 10 of 32

Thread: All these good members and no one else has projects

  1. #1
    Gunco Member romack991's Avatar
    Join Date
    Feb 2004
    Location
    Indiana
    Posts
    51
    Feedback Score
    0

    Default All these good members and no one else has projects

    come on guys, some of you must be building on some rifles...

    The goal of engineering is failure.
    -I'm gonna make one hell of an engineer.

  2. #2
    RIP Sangrun Hunter's Avatar
    Join Date
    Feb 2004
    Posts
    12,413
    Feedback Score
    28 (100%)

    Default

    If only I had the time at the moment to get started on my first. Through the years I have done countless little things, but getting started on my first build will probably take longer than the actual build.

    There is only 2 more things I need to get to start. I need lower rails and a set of drill bits from good ole' HF.

  3. #3
    Chief Administrator 7.62x39's Avatar
    Join Date
    Feb 2004
    Posts
    6,623
    Feedback Score
    10 (100%)

    Default

    I've got several lined up, just waiting for some warmer weather.

    Between the noise and the fumes, I can only stand that old propane heater in the shop for short stretches at a time.

    I think it's time to start looking down in George's and Citra's neighborhood, or at least as fas south as Winn.

    I think I'm getting to old for these New England winters

  4. #4
    GuncoHolic scubadvr's Avatar
    Join Date
    Feb 2004
    Location
    Key West = Heaven
    Posts
    2,837
    Feedback Score
    5 (100%)

    Default

    I have moved my shop from the garage into the living room as my wife is away at a horse show in Scottsdale AZ. I have put off painting however (don't want to push my luck or spay paint the poodles or the cat) until the spring.
    Be sure to check out:
    www.warroom.com
    and
    www.michaelsavage.com


    ******************************************
    What ever it is I'm against it.
    Always question authority.

  5. #5
    Administrator sniper69's Avatar
    Join Date
    Feb 2004
    Location
    Was Germany, now Ohio
    Posts
    6,675
    Feedback Score
    42 (100%)

    Default

    I am currently working on an AMD63 project and also have a 223 and another 7.62x39 near completion. I really need to finish them up though. Maybe then i will post some pics.

  6. #6
    Gunco Regular tarawa's Avatar
    Join Date
    Feb 2004
    Location
    Sunny South Florida aka: knee deep in horse manure!
    Posts
    825
    Feedback Score
    3 (100%)

    Default

    I have two RPKs in the works, but just can't get motivated.
    gtbehary........ ak builder, hack machinist, nuclear worker and violin huckster!

  7. #7
    Byg
    Byg is offline
    Gunco Member Byg's Avatar
    Join Date
    Feb 2004
    Posts
    152
    Feedback Score
    0

    Default

    I got the amd-63 to do. I was waiting on the rivets from the group buy..No hurry though..I sand blasted my bulgi Mak and did the teflon moly finish,turned out pretty nice.

  8. #8
    Gunco Member amdburner's Avatar
    Join Date
    Feb 2004
    Location
    Vermont
    Posts
    25
    Feedback Score
    0

    Default

    Quote Originally Posted by 7.62x39
    I've got several lined up, just waiting for some warmer weather.

    Between the noise and the fumes, I can only stand that old propane heater in the shop for short stretches at a time.

    I think it's time to start looking down in George's and Citra's neighborhood, or at least as fas south as Winn.

    I think I'm getting to old for these New England winters

    Max,
    I have the same issue when working on my friends race car during the winter. He and his dad fire up a salamander to heat the garage up and I find myself just about tossing my cookies. What part of New England are you located? I'm up to my eyeballs in liberals in northwestern Vermont.

  9. #9
    Gunco Rookie GUNMAN181's Avatar
    Join Date
    Feb 2004
    Location
    Oklahoma
    Posts
    16
    Feedback Score
    0

    Default

    my current projects are finishing ak105 build
    preban bulgy krink build
    starting psl,
    yugo m48 sniper
    just started and finished today imbel fal.
    too many projects, not enough time.
    " EVERY DAY ABOVE GROUND IS A GOOD DAY"

  10. #10
    Moderator Chiroone's Avatar
    Join Date
    Feb 2004
    Posts
    1,171
    Feedback Score
    16 (100%)

    Default

    Have everthing I need to start; press, jigs, kits but no rivets!! I am also waitting for group buy.

    RIVETS, RIVETS, MY KINGDOM FOR SOME RIVETS!

Page 1 of 4 1 2 3 4 LastLast

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •