Page 1 of 6 1 2 3 4 5 ... LastLast
Results 1 to 10 of 58

Thread: 6.5 grendel AK

  1. #1
    3/6 Infantry mtdew's Avatar
    Join Date
    Jul 2005
    Location
    Benton,AR
    Posts
    3,265
    Feedback Score
    3 (100%)

    Default 6.5 grendel AK

    Not completed, but close. restorit turned,chambered,headspaced, and assembled the bbl for me. He does exellent work. Good prices too. Temporary bolts/nuts holding rec,trunion together till I get it tuned (feed ramp). Hope to have mag well started soon. Will keep u posted.
    Attached Images Attached Images
    "NA BEAN DON CHAT GUN LAMHAINN"
    Clan MacPherson
    "CREAG DHUBH"!

  2. #2
    Gunco Addicted for life j427x's Avatar
    Join Date
    Oct 2006
    Posts
    9,349
    Feedback Score
    8 (100%)

    Default

    looking good!

  3. #3
    GuncoHolic 2ndAmendican's Avatar
    Join Date
    May 2009
    Location
    Taylors, S.C.
    Posts
    4,913
    Feedback Score
    34 (100%)

    Default

    That looks great so far MtDew!!
    Enforcement, NOT Amnesty!!!!!!

    "If they’re going to come here illegally, apply for & receive assistance through a corrupted Government agency encouraging this lawless behavior, work under the table & send billions of dollars each year back to their families in Mexico, while bleeding local economies dry, protest in our streets waving their Mexican flags DEMANDING rights, while I have to press ’1′ for English, then they need to be shipped back to where they came from!" -Chad Miller

  4. #4
    3/6 Infantry mtdew's Avatar
    Join Date
    Jul 2005
    Location
    Benton,AR
    Posts
    3,265
    Feedback Score
    3 (100%)

    Default

    Cant say enough good things about restoreit's talent w/ a lathe. He tuned the a&b bbl blank to fit the ak trunnion and rpk gas block perfectly. His assembly is flawless. Wish I had the tools to do this kinda work. My "kyber pass" gunsmithing is passable(Rear sight base welded to trunnion) but his work is flawless. Gives me something to aim for.
    "NA BEAN DON CHAT GUN LAMHAINN"
    Clan MacPherson
    "CREAG DHUBH"!

  5. #5
    Gunco Regular BlackFetus's Avatar
    Join Date
    Aug 2010
    Posts
    338
    Feedback Score
    1 (100%)

    Default

    watcha doin for a mag well? and sights? XD

  6. #6
    3/6 Infantry mtdew's Avatar
    Join Date
    Jul 2005
    Location
    Benton,AR
    Posts
    3,265
    Feedback Score
    3 (100%)

    Default

    Just finished the magwell last nite. Used 6 peices of 1/8 flat steel, cut to shape and welded together and to rec, the back part took three peices. No sights planned, scope rail mounts to rear sight base and rear trunnion,hope it works out. I may put on an rpk front site someday. I'll take some pics tonite and post them tomorrow.
    "NA BEAN DON CHAT GUN LAMHAINN"
    Clan MacPherson
    "CREAG DHUBH"!

  7. #7
    3/6 Infantry mtdew's Avatar
    Join Date
    Jul 2005
    Location
    Benton,AR
    Posts
    3,265
    Feedback Score
    3 (100%)

    Default

    Dont look too close at the nappy tack welds. Im gonna clean it up and it will look better(w/ a little jb weld filler).
    Attached Images Attached Images
    "NA BEAN DON CHAT GUN LAMHAINN"
    Clan MacPherson
    "CREAG DHUBH"!

  8. #8
    GuncoHolic 2ndAmendican's Avatar
    Join Date
    May 2009
    Location
    Taylors, S.C.
    Posts
    4,913
    Feedback Score
    34 (100%)

    Default

    That'll look good once it's cleaned up. Doing a great job, man.
    Enforcement, NOT Amnesty!!!!!!

    "If they’re going to come here illegally, apply for & receive assistance through a corrupted Government agency encouraging this lawless behavior, work under the table & send billions of dollars each year back to their families in Mexico, while bleeding local economies dry, protest in our streets waving their Mexican flags DEMANDING rights, while I have to press ’1′ for English, then they need to be shipped back to where they came from!" -Chad Miller

  9. #9
    Gunco Addicted for life j427x's Avatar
    Join Date
    Oct 2006
    Posts
    9,349
    Feedback Score
    8 (100%)

    Default

    i had one that welded up sort of rough cause i used my cracker-box to do the job but the welds held well.

    i took the project over to my uncles shop where he a has a very nice wire welder.

    so i welded over the seams again with the wire welder and really built the weld up. then after it cooled down took the grinders and dremmils to it.

    the finished part looked pretty darned good when it was finished up.

    he, he i may have to borrow your mag-well ides if i build a 6.5 AK as i have ar mags and ammo for my 6.5 AR-15!

  10. #10
    Gunco Regular chopper's Avatar
    Join Date
    Mar 2009
    Location
    MICHIGAN
    Posts
    442
    Feedback Score
    0

    Default

    oh man thats cool

Page 1 of 6 1 2 3 4 5 ... LastLast

Search tags for this page

1977 ak47
,
ak pistol
,

ak74s

,

anyone use kvar rpk barrel on m72 build

,

pics of yugo m70

,

pkm buttstock

,
romy g 1983
,

rpk

,
rpk pics
,

saiga 12 conversion

,

yugo m92

,

yugo rpk

Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •