UZI trigger pull
Results 1 to 3 of 3

Thread: UZI trigger pull

  1. #1
    Gunco Rookie AK-17's Avatar
    Join Date
    Aug 2009
    Feedback Score

    Question UZI trigger pull

    Is there any way to lower the trigger pull on an IMI Uzi pistol? If you know how, could you give me directions on how to do it on my own and what tools I need to do it with.

  2. #2
    Gunco Good ole boy kernelkrink's Avatar
    Join Date
    Jun 2004
    Feedback Score
    2 (100%)


    At least a couple gunsmiths offer it, so it is possible. The main problem is the interface between the sear and the striker is critical, changing the angle and amount of engagement smooths and lightens the trigger pull, but if you do it wrong you get an unsafe and unreliable gun.

    With an unloaded cocked pistol, leave the topcover off, hold the bolt in place, and watch the striker as you pull the trigger. If it moves rearward that is a major source of your heavy trigger pull. The angle of the sear/striker engagement surfaces can be changed so the sear moving downward no longer cams the striker back. Get the wrong angle and there will be ......trouble. Beyond that it should be like any other trigger work, just polish and smooth every contact point between the trigger/sear/striker for smoothness. If the trigger return spring is really stiff it can be bent to releave some pressure.

  3. #3
    Riding Instructor sharps_74's Avatar
    Join Date
    Dec 2005
    Not at home
    Feedback Score


    Thanks for posting that information. The trigger pull on mine is a bit stout as well. I thought it was just due to it being new (less than 500 rounds).

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts