Results 1 to 7 of 7

Thread: some of the pps-43 tube gun build.

  1. #1
    Gunco Veteran perry's Avatar
    Join Date
    Nov 2009
    Posts
    1,006
    Feedback Score
    0

    Default some of the pps-43 tube gun build.

    first off hello all. i amm trying to address the same thing i tryto bring up on weapons guild with no such help. let roll on and here is can a pps=-43 be welded on, can u use a AR15 BUFFER-5RECOIL SPRING TO RECOIL A 7.62X25 pps-tube gun? it was a pps-43 bolt i meant on welding. thanks perry

  2. #2
    gunco irregular moleman's Avatar
    Join Date
    Feb 2005
    Location
    Next door to my neighbors house in Michigan
    Posts
    3,149
    Feedback Score
    3 (100%)

    Default

    Perry, Are you wanting to put a recoil spring guide rod at the back like a sgn-9ish build? The pps43 bolt will work in a tube if you cut the bolt slot correctly at an angle and remove the back side of the handle where it would protrude into the tube. If you're adding a guide rod for the AR15 spring and to add weight, you can pin it on like this one (a modified suomi bolt) for a sgn-9.
    What all do you have in mind?
    Attached Images Attached Images

  3. #3
    Gunco Veteran muttman's Avatar
    Join Date
    Dec 2004
    Location
    west, TN.
    Posts
    1,172
    Feedback Score
    0

    Default

    dam moleman you do good work. muttman

  4. #4
    gunco irregular moleman's Avatar
    Join Date
    Feb 2005
    Location
    Next door to my neighbors house in Michigan
    Posts
    3,149
    Feedback Score
    3 (100%)

    Default

    Thanks muttman, I just wish remodeling was as fun as making gun parts.

  5. #5
    Gunco Veteran perry's Avatar
    Join Date
    Nov 2009
    Posts
    1,006
    Feedback Score
    0

    Default

    sorry for taking so long on replying first i am laying stuff on the table and thinking of all the possiblities, i am thinking a 870 or a ar trigger parts for a fcg, a carbine butt stock plus a ar recoil spring, a standard trunnoin mod a little to change barrels to fir both 7.62x25 and a 9mmlargo out of a 18 to 20 inch barrel apic rail on top.

  6. #6
    Gunco Veteran perry's Avatar
    Join Date
    Nov 2009
    Posts
    1,006
    Feedback Score
    0

    Default

    also the cocking nob on the leftside and made like a sten. aself made firig pin .

  7. #7
    Gunco Veteran perry's Avatar
    Join Date
    Nov 2009
    Posts
    1,006
    Feedback Score
    0

    Default

    one more thing, a important thing is the ejector? i think of tack welding something like the original inside the tube somehow. this is the hair puller and i thought of adding a bolt extention to make the ar buffer spring work . i probably work on this on off for the next year so i am not in a rush so keep pouring the ideals in please and thank u very much. i have lately gotten help from the fine guys on weapons guild also. 2- heads r better than one if u know what i mean.

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •