Results 1 to 6 of 6

Thread: WTS/WTT: Make Your Rifle Plates Safer- Spall Guards

  1. #1
    D-R
    D-R is offline
    Gunco Regular D-R's Avatar
    Join Date
    Aug 2005
    Posts
    618
    Feedback Score
    14 (100%)

    Default WTS/WTT: Make Your Rifle Plates Safer- Spall Guards







    PLEASE USE IM FOR QUESTIONS OR COMMENTS

    CHECK OUT MY ARMOR BLOG: http://www.drmorgear.wordpress.com

    With so many folks offering high quality steel rifle plates, thought this would be a good time to offer a deal on my handmade spall guards. When using steel (and sometimes even ceramic plates), bullet impacts that do not defeat the armor will result in spall (fragmentation/splash) that can injure or even kill.

    These slip-on spall guards will be custom built to fit ANY steel or ceramic rifle plates, and completely envelope the plate. A special form of Kevlar 129 on the strike face will trap fragments within the guard.

    NEW VERSION (4.2.2) is made with IR spec Coyote 1000 Denier Cordura nylon on the outside, a special variant of Kevlar 129 as the defeat material, and has full 360 degree spall/splash protection.



    PRICING: $49 each + shipping, $93.25 for a pair + shipping. Just send an IM or email with how many guards you want.


    PRICING IS FOR 10" X 12" RECTANGULAR OR TRAPEZOIDAL PLATES. Smaller or larger plates can be accommodated, just ask for pricing.

    THESE ARE DESIGNED TO WORK WITH THE FOLLOWING PLATES:

    AR500
    Targetman
    Steel Defender
    Diamondback Tactical
    Flash Bainite
    Armored Mobility
    Infidel

    THE FOLLOWING PICTURES SHOW STEEL PLATES WITH TRUCK BED LINER. NOTE THAT THE IMPACTS REMOVE THE LINER, RENDERING THE PLATES LESS EFFECTIVE FOR FOLLOW-ON SHOTS (Thanks to VFLORES915 for use of the pictures):

    Showing the spalling still present even with the liner, struck with two rounds of 7.62X39.

    Close up of the ablation of the liner.

    My guards to not exhibit ablation due to material choice.

    Factors that make these the best spall guards you can get:

    1) Non-permanent, replaceable deployment- can swap the guards between plates.

    2) Elegant, low-drag solution- no duct tape 'n gorilla glue here.

    3) Effective- in tests, cuts down on spall by nearly 98%.

    4) Low weight, small size- adds less than 4 oz. per plate, and less than 1/4" thickness total. COMPARE to Rhino Lining, which adds nearly 3/8" thickness and nearly half a pound, or metallic solutions which add even more weight.

    5) Durable- specialized, non-fraying ballistic defeat material and ultra tough 1000 Denier Cordura nylon.

    6) Extra protection to the plates- helps prevent dents, dings, chips and cracks in your rifle plates. Think of them like seat covers for your new car, but with more oomph!

    7) Is engineered- Truck bed liner is not particularly effective unless it is troweled on thick. These guards use cutting edge, specialized Kevlar material.

    8) Multi-Hit Effective- Truck bed liner works well for approximately 4 rounds, at which point its spall absorption drops dramatically. Spall guards remain effective longer, and are easily replaced after use.

    9) Odor free- Lined plates have a strong chemical odor that can persist for months.

    10) IT WORKS- Other "solutions" using woven Kevlar try to throw more material at the problem, but they fail, because woven Kevlar does not work very well against small, high velocity fragments. Duct taping old vest material also lowers your CDI* factor.

    Delivery: currently 8-10 days from receipt of payment to delivery. (I am just one guy doing this in my spare time).

    I accept USPS money order or cash only. No PP, no personal checks, no bank money orders. TRADE INTERESTS BELOW.

    Thanks!

    *Chicks Dig It

    **********************TRADE INTERESTS (ONLY THESE!)**************************
    Trijicon RMR 7/9 MOA Dual Illuminated (tritium/sunlight) Sights
    Magpul M3 30 Round Mags
    Magpul LR20 Mags
    JP Rifles Enhanced Bolts (.223 and .308)
    AR Stripped Uppers- A3 only
    LR308 Stripped Uppers
    Magpul CTR, UBR or PRS stocks
    Aimpoint Comp M4 or M4S Sight
    Trijicon RX-01 NSN or RX-30 Holosights
    Rainier Arms Raptor Charging Handles (.223 or .308)
    Noveske .300 BLK 8.1" Pistol Barrel
    BCM BCGs
    DD Hammer Forged 16" midlength barrels
    Barnes .224 45, 50, 70 gr. TSX Bullets
    Barnes .30 110 gr Tac-X bullets
    Barnes .30 130 gr TSX or TTSX bullets
    Mk318 or Mk319 pulled bullets
    Circle 10 Bulgarian 30 Round Mags
    NEW (not pulled) SMK 175 Gr Bullets
    Lapua or LC M118 LR 308 brass (new or once fired only)
    Tripps Cobramags 2nd Generation
    10-8 1911 Rear Sights (Novak cut)
    Kart EZ-Fit .45 Non-ramped Gov length barrels
    VZ Grips (Gunner, Recon, Recon 2 Aliens)
    Gold/Silver (Bullion/Rounds/Junk, no numismatic value)
    Last edited by D-R; 02-28-2014 at 02:52 AM.

  2. #2
    D-R
    D-R is offline
    Gunco Regular D-R's Avatar
    Join Date
    Aug 2005
    Posts
    618
    Feedback Score
    14 (100%)

    Default

    BTT...

  3. #3
    D-R
    D-R is offline
    Gunco Regular D-R's Avatar
    Join Date
    Aug 2005
    Posts
    618
    Feedback Score
    14 (100%)

    Default

    BTT...

  4. #4
    D-R
    D-R is offline
    Gunco Regular D-R's Avatar
    Join Date
    Aug 2005
    Posts
    618
    Feedback Score
    14 (100%)

    Default

    BTT...

  5. #5
    D-R
    D-R is offline
    Gunco Regular D-R's Avatar
    Join Date
    Aug 2005
    Posts
    618
    Feedback Score
    14 (100%)

    Default

    BTT...

  6. #6
    D-R
    D-R is offline
    Gunco Regular D-R's Avatar
    Join Date
    Aug 2005
    Posts
    618
    Feedback Score
    14 (100%)

    Default

    BTT...

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •