Parts, spring, trigger, all lower parts look new and well oiled. I can drop the bolt in by itself and it moves smooth and free in the carrier and out. The firing pin is free but nothing sticks out until you push hard on the strike area. The go guage goes in and the bolt rotates down til the lug is just about touching the trunion. If I put a good round in the bolt and drop it in the bolt does not rotate in without help. The magazines all fit in snug, no play, they go up and sit against the lower sides of the lower rails, the hammer spring has three wraps on each side and looks good. I have two European 30 rd mags, one like new composit mag made in Bulgaria and two 20rd Tapco 233 plastic mags. The latter three work good when it fires. Throws the empties about 20 feet behind and to my right.
My wife's family is here for 3 days and I've just been told to stop this so it may be 3 days before I get more pictures taken. Thanks a lot for the help.