ORIGINAL British manufactured Mark 1 bayonet for use with the MARK 2 STEN sub-machine gun! "L" Marked, No scabbard *Condition Very Good*. $275






Sold individually.
This ORIGINAL bayonet for the Mark II STEN gun has to be the rarest & most sought after of British World War II bayonet's!!
This bayonet is seldom seen in even the most advanced bayonet collections, as nearly all examples of this bayonet were said to have been scrapped after the second World War.
As you can imagine we do not have many of these bayonets available.
They are in very good condition under the thin layer of oily grime that has accumulated from years of storage.

Here is what I know about the manufacturing history of these bayonets.
The parts for the MARK 1 bayonet for use with the STEN MK2 SMG were manufactured by a group of component sub-contractors.
The parts & components were then welded/assembled by two, possibly three firms.
The bayonet pictured appears to have been assembled by Grundy based on the presence of their wartime code of S41, stamped on the upper left side of the bayonets body section.
Also visible are the markings of the B & J Sippel Co. Ltd ...a spring sub-contractor and provider of additional manufacturing operations.
This B & J S Ltd. marking is found on both the top of the spring catch & left side of the bayonet body.
Other markings are the British War Department "Broard Arrow" showing ownership, as well as a letter "L" on the side of the body (significance unknown).

When looking around on the web you will note a number of reproduction STEN bayonets are available.
These copies of STEN bayonets have been on the market for years as the original examples were not available until now.
The copies are fairly faithful to the originals, but when set side by side with an ORIGINAL example, the differences are easy to see.
I have one of our ORIGINAL STEN bayonets pictured.
Points to pay attention to are... the raised nib of the spring catch, as well as the shape & radius of the vertical extension of this latching spring.
The copies of the bayonet for the STEN MKII are almost handmade and the differences from the original stand out.
When observing the tip of the spike, the ORIGINAL is well shaped, but the copies are not so well done & are not uniform.
Finally, please note the markings stamped on the bayonet body and the number stamped into the spike itself just forward of the body section, these marks are not present on the copies.

This is your opportunity to own one of THE most unusual finds we have had pass thru our doors at APEX Gun Parts!

Please, no OVERSEAS Sales.

Follow this link to purchase:
https://www.apexgunparts.com/product...oducts_id/3698

These and many other kits/parts/barrels/magazines are available for sale on our web site.

APEX Gun Parts
719-481-2050 ORDER LINE
http://www.apexgunparts.com
Mon-Fri 8am to 4pm Mountain time

LIKE us on Facebook!
https://www.facebook.com/ApexGunParts

ORIGINAL British manufactured Mark 1 bayonet for use with the MARK 2 STEN sub-machine gun! "L" Marked, No scabbard *Condition Very Good*. $275