585 HE -- Cases In Production -- - Page 9
Page 9 of 9 FirstFirst ... 56789
Results 81 to 87 of 87

Thread: 585 HE -- Cases In Production --

  1. #81
    Gunco Regular hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    373
    Feedback Score
    0

    Default

    Got guys doing various 416 HEs..

    One just built a 416 HE, just been testing it a few days..

    And using 168gr of HBMG 475 gr CEB, tested it, in good

    conditions, 2 shots at 1800 yards and was within

    a 1/4 of minute accuracy...A few shots at shorter ranges

    had same accuracy. Ed..

  2. #82
    Gunco Regular hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    373
    Feedback Score
    0

    Default

    More about our 416 HSM from BMG brass, and
    our 416 HE & 460 HE from our 585 HE cases
    Got reamers for 375 HE, 416 HE and 416 HSM,....

    460 HE & 460 HSM are all spec'd, got HE reamer
    soon have HSM reamer...Our HSMs have a Wea type
    radius on the shoulder..

    The fellow that set up our 416 HE in an ELR rifle
    and got 1/4 min accuracy,
    They got some game out west over 1400 yds..
    .Here is the gun they set up.
    Using a K&P 34" barrel on a BAT action.....Ed


  3. #83
    Gunco Regular hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    373
    Feedback Score
    0

    Default

    And have got 460 HSM specs setup, the impetus for that is some
    asking about one and new great line of 458 bullets CEB now has.

    It will hold more powder than the 416 HSM and will get
    a 572 gr as fast as 416 HSM gets a 475gr.....Ed..

  4. Remove Advertisements
    Gunco.net
    Advertisements
     

  5. #84
    Gunco Regular hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    373
    Feedback Score
    0

    Default

    The guys that did the super accurate 416 HE did another
    416 HE that has an 8" longer 42 inch K&P barrel..

    Used a Stiller action and same load with 475 gr bullet, as in
    first gun and and gained about 200 fps with good accuracy.
    3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

    And loads they used are not the highest speed loads
    the cartridge is capable of....Here is print with specs for
    the 416 HE reamer chamber ....Ed....

    http://www.gunownerstv.com/416heream.jpg
    Last edited by hubel458; 07-13-2020 at 07:04 PM.

  6. #85
    Gunco Regular hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    373
    Feedback Score
    0

    Default

    More about he guys that did the accurate 416 HE, they did a
    416 HE that has an 8" longer 42 inch K&P barrel..

    Used longer barrel and the same load with 475 gr bullet, as used
    in the first gun and and gained about 200 fps with good accuracy,.
    3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

    And loads they used are not the highest speed loads
    the cartridge is capable of....Here is picture.......Ed....


    http://www.gunownerstv.com/jacobgun2.jpg
    Last edited by hubel458; 07-13-2020 at 07:07 PM.

  7. #86
    Gunco Regular hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    373
    Feedback Score
    0

    Default

    Away for a time, sickness..
    Here is print with chamber reamer specs for the
    416 HSM chamber..There are 3 base sizes we have,
    depending on actions used. Got reamers for all 3..
    Got cases for all of them..
    Our cases are public domain, so that is why I post
    info and specs. To help guys do their own setups.
    Manson makes reamers I use,,, Ed.
    Attachment 52697

  8. #87
    Gunco Regular hubel458's Avatar
    Join Date
    Jun 2008
    Posts
    373
    Feedback Score
    0

    Default

    Here is reamer print with chamber reamer specs for
    the 460 HSM chamber .Couple guys getting set
    to do 38-40 inch heavy 458 target barrels...Ed....
    http://www.gunownerstv.com/460hsmream.jpg

Page 9 of 9 FirstFirst ... 56789

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •