Recreator Blanks
Results 1 to 3 of 3

Thread: Recreator Blanks

  1. #1
    Gunco Maniac Tommo's Avatar
    Join Date
    Mar 2004
    Posts
    6,784
    Feedback Score
    3 (100%)

    Default Recreator Blanks

    Received a couple AK blanks from Matt, they look to be of as good quality as Childer's and NoDak blanks.

    ReCreator Blanks AK74 AK47 blank receiver shells 80 percent

  2. #2
    Gunco Maniac Tommo's Avatar
    Join Date
    Mar 2004
    Posts
    6,784
    Feedback Score
    3 (100%)

    Default

    The AK74 receiver had trigger pin humps which made the receiver sit a little high in my AK Builder jig. When I drilled the trigger pin hole, it was lower in the receiver than usual. Had to modify the trigger's rear legs by filing about 1/8 inch of material off the bottom of them so the trigger would sit level. The top of the hammer had to be trimmed to let the trigger hold onto it when cocked.

    I will have to grind a depression in the jig for the humps so I do not drill the trigger pin holes too low again.
    Last edited by Tommo; 08-30-2018 at 09:07 AM.

  3. #3
    Gunco Maniac Tommo's Avatar
    Join Date
    Mar 2004
    Posts
    6,784
    Feedback Score
    3 (100%)

    Default

    Another +1 for Recreator blanks.

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •