rear trunion and cetner support rivets
Results 1 to 3 of 3

Thread: rear trunion and cetner support rivets

  1. #1
    Gunco Member ken98k's Avatar
    Join Date
    Apr 2009
    Location
    Alaska
    Posts
    84
    Feedback Score
    0

    Default rear trunion and cetner support rivets

    Working on an AMD-65. Seems I recall the rear trunnion and center support rivets should be trimmed so they stick out 1.5 times their diameter before peening them?
    1st one.jpg

  2. #2
    Gunco Maniac Tommo's Avatar
    Join Date
    Mar 2004
    Posts
    6,840
    Feedback Score
    3 (100%)

    Default

    I do not shorten them at all.

  3. #3
    Gunco Veteran AKarl_12's Avatar
    Join Date
    Mar 2006
    Location
    S.W. Indiana
    Posts
    1,558
    Feedback Score
    2 (100%)

    Default

    Right that's kinda a rule of thumb measurement. It can very depending if the rivet holes were enlarged during demill, then it would take a little longer rivet to squeeze down to fill the holes.

Search tags for this page

There are currently no search engine referrals.
Click on a term to search our site for related topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •