Gunco Forums banner

11.5" chrome lined barrel deal $156

1564 Views 16 Replies 6 Participants Last post by  j427x
DPMS Barrel AR-15 Pistol 5.56x45mm NATO Heavy Contour 1 in 9" Twist 11.5" Chrome Lined Chrome Moly Matte with Front Sight Tower Pre-Ban - MidwayUSA

$165 discount code for june 223610 gives $10 off at checkout. they just got these in stock and there are about a dozen left.

$155 for a chrome lined barrel ain't too bad. these have been hard to come by since the panic for less than $200.

you can use these to build a pistol or a 11.5" barreled rifle with a 4.5"-5.5" welded or blind pinned for a total of at least 16".

or you can do the NFA thing pay the $200 and get the proper stamp and do a SBR--while you can.

these come with barrel nut, m4 style ramps, front sight base and end cap. 1/2-28 on the muzzle. they are H-bar profile, chrome barrel and chamber, 1 turn in 9" twist rate, NATO spec chamber.

these make a pretty decent xm-177e2 replica with the correct length flash hider pinned/welded/soldered on.
1 - 17 of 17 Posts
damm that is tempting The ATF cashed my check for my SBR may 10 I might to order one (I have a few pistol lowers with out barrels I could put it on till my paperwork clears)
i am building a xm177e2 "clone"-- it won't be an exact copy as this is a heavy barrel. i am going to use a a2 upper too. with the 4.6" flash hider blind pinned on it is going to be exactly 16.15" length wise which gets me out of NFA regulation. will be reasonably close to the real 177e2. mine will have a few modern things like 1-9 twist, Hbar, black finish but most important it will FEEL a lot like the old 177e2--

the one in the photo is a e1 that was 10" and some odd --i think 10.2"

the e2 is just like the e1 but it was 11.5" all the old ones were pencil barreled with very slow twist rates.

one of these days i am going to finish that a1 build i bought that upper for a decade ago--LOL!

Attachments

See less See more
Thanks for the heads up I just snagged two!
j427x do you know what the code is to get $20 off on $200 buy, at checkout? I messed up and deleted the email from midway with the codes on them
as far as i know there are only three codes for june one is a $10 and the other i think is a $50& $100 off $1K IIRC.

ok here are the codes i got for june --but no $20 off $200 and no $15 off $150 like last month. there kind of skimpy on the discount code for this month if ya ask me. just a couple months back they were giving sack fulls of codes in $10 , $15, $20, $25 $30 per $100 spent.

223610 $10 off

308610 $50 off $500

338610 $100 off $1,000
down to the last six of these. when they go OOS it could be weeks or months before there are any more. or they could get a dump truck load of the in stock next week. YMMV

my experience lately is when something is OOS. get ready for a long, long wait.
Jse also has a cheap m4 profile unfinished barrel for $70. It needs the gas port drilled and parkerized though. 16 In M4 Profile Chrome Moly 1x9 5.56 - In the white SPECIAL You'd be hard pressed to make one for yourself for that price.
Jse also has a cheap m4 profile unfinished barrel for $70. It needs the gas port drilled and parkerized though. 16 In M4 Profile Chrome Moly 1x9 5.56 - In the white SPECIAL You'd be hard pressed to make one for yourself for that price.

now if i could turn that down to GI profile and convert it to a middy?!--LOL!:nanabang:
now if i could turn that down to GI profile and convert it to a middy?!--LOL!:nanabang:
I know, I looked at them and thought the same thing. Unless I can SBR a 10-11.5" ar I'm done with the car length gas system. I don't think it would work unless you could find one of the 5/8" or whatever they are pencil barrel fsb.
moleman.

I know, I looked at them and thought the same thing. Unless I can SBR a 10-11.5" ar I'm done with the car length gas system. I don't think it would work unless you could find one of the 5/8" or whatever they are pencil barrel fsb.
I just sent in for my next tax stamp. Hell it is only $200. I have spent more than that in an hour in the bar. :)
I am telling everyone these tax stamps are gonna be money someday.
Like pre ban machine gun stamps.
Gonna send for one a month till I go bankrupt. Which should be soon.
I only have a few AKs left too build.
Now I am getting into stamp collecting.
Maybe Gunco Bob can start a new forum. "Stamp collections." :)
I just sent in for my next tax stamp. Hell it is only $200. I have spent more than that in an hour in the bar. :)
I am telling everyone these tax stamps are gonna be money someday.
Like pre ban machine gun stamps.
Gonna send for one a month till I go bankrupt. Which should be soon.
I only have a few AKs left too build.
Now I am getting into stamp collecting.
Maybe Gunco Bob can start a new forum. "Stamp collections." :)
if i had $$$ like in the pre-bush/obamma days i would belly up to the bar and and order two or three of those special 'tax-stamps".

my class three buddie came by here the other day with his 12" mall-ninja tax stamped shortie. mucho fun to shoot. i am thinking of getting a stamp for my xm-177. i would have to machine off the flash hider when the stamp was approved. i just cringe at handing over $2 bills to the government though. LOL!:nanabang:
I currently live in Illinois where sbr are not allowed. We're in the process of moving to Michigan and I don't believe they're allowed there either. I looked it up a while back and was disappointed that Mi doesn't allow suppressors either:grumble: If I read it right it looked like they allow C&R full auto though:woot:
fresh $20 off $200 discount code for june

2062010 if your wanting to get one of the last 5.
i just punch in a number like say 12 and see how many back orders come up when i add the items to my cart.
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top