Gunco Forums banner

81 - 92 of 92 Posts

·
Registered
Joined
·
378 Posts
Discussion Starter · #81 ·
Got guys doing various 416 HEs..

One just built a 416 HE, just been testing it a few days..

And using 168gr of HBMG 475 gr CEB, tested it, in good

conditions, 2 shots at 1800 yards and was within

a 1/4 of minute accuracy...A few shots at shorter ranges

had same accuracy. Ed..
 

·
Registered
Joined
·
378 Posts
Discussion Starter · #82 ·
More about our 416 HSM from BMG brass, and
our 416 HE & 460 HE from our 585 HE cases
Got reamers for 375 HE, 416 HE and 416 HSM,....

460 HE & 460 HSM are all spec'd, got HE reamer
soon have HSM reamer...Our HSMs have a Wea type
radius on the shoulder..

The fellow that set up our 416 HE in an ELR rifle
and got 1/4 min accuracy,
They got some game out west over 1400 yds..
.Here is the gun they set up.
Using a K&P 34" barrel on a BAT action.....Ed

 

·
Registered
Joined
·
378 Posts
Discussion Starter · #83 ·
And have got 460 HSM specs setup, the impetus for that is some
asking about one and new great line of 458 bullets CEB now has.

It will hold more powder than the 416 HSM and will get
a 572 gr as fast as 416 HSM gets a 475gr.....Ed..
 

·
Registered
Joined
·
378 Posts
Discussion Starter · #84 · (Edited)
The guys that did the super accurate 416 HE did another
416 HE that has an 8" longer 42 inch K&P barrel..

Used a Stiller action and same load with 475 gr bullet, as in
first gun and and gained about 200 fps with good accuracy.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

And loads they used are not the highest speed loads
the cartridge is capable of....Here is print with specs for
the 416 HE reamer chamber ....Ed....

http://www.gunownerstv.com/416heream.jpg
 

·
Registered
Joined
·
378 Posts
Discussion Starter · #85 · (Edited)
More about he guys that did the accurate 416 HE, they did a
416 HE that has an 8" longer 42 inch K&P barrel..

Used longer barrel and the same load with 475 gr bullet, as used
in the first gun and and gained about 200 fps with good accuracy,.
3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

And loads they used are not the highest speed loads
the cartridge is capable of....Here is picture.......Ed....


http://www.gunownerstv.com/jacobgun2.jpg
 

·
Registered
Joined
·
378 Posts
Discussion Starter · #86 ·
Away for a time, sickness..
Here is print with chamber reamer specs for the
416 HSM chamber..There are 3 base sizes we have,
depending on actions used. Got reamers for all 3..
Got cases for all of them..
Our cases are public domain, so that is why I post
info and specs. To help guys do their own setups.
Manson makes reamers I use,,, Ed.
View attachment 52697
 

·
Registered
Joined
·
378 Posts
Discussion Starter · #88 ·
With 40 inch barrel 416 HSM ,475 gr, get 3650, over 13,000 ft lbs muzzle energy.
Got guys getting set to have 38-40 inch 458 barrels made for 460 HSM.Ed..
 

·
Registered
Joined
·
378 Posts
Discussion Starter · #91 ·
416 & 460 HE AND 416 & 460 HSM .LONG RANGE AND HUNTING
Can be set up in  Pierce  X10  ACTION for the 416 & 460 HE  
AND X20 action for the 416 & 460 HSM , Can get those
if guys need one...Ed
 
81 - 92 of 92 Posts
Top