Gunco Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
Hi folks. My first post here, but I've been around other boards for a while.

I'm a complete novice when it comes to machine work. Is there a good book out there that explains machine work in simple terms? I need to learn about X and Y axis, cutting tools, etc.


I know working with a machinist would help me immensely, but I don't know one.

Thanks!


JoeLad
 

·
Master Endmill Breaker
Joined
·
1,367 Posts
This is just one amateur's opinion...

Any edition of "Machinery's Handbook" will be a great addition to your library. The "Machinery's Handbook Guide" is a great supplement to the handbook. The books cover a massive range of topics including: mathematics, mechanics, strength of materials, machining operations, and manufacturing processes. These can be bought online, but shop around for a better price.

http://www.amazon.com/exec/obidos/t...103-9990310-2544611?v=glance&s=books&n=507846

You don't need the absolute latest edition, so don't pass up an earlier revision if it's really cheap. I'm pretty sure the latest revision is 26, as I haven't seen anything newer.
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #4 ·
Thanks fellas. I saw it on Amazon, and it looks very comprehensive.
I'm also looking at the "Home Machinist" by Doug Briney.


I think a road trip to the local HF store is in order...

JoeLad
 

·
Registered
Joined
·
15 Posts
the X axis is where the hammer pin goes through and the Y axis is for the trigger pin. Suprizingly a book with some of the most relavant machine work on guns specifically is available at walmart in the sporting goods area. It's called "gunsmithing at home" and is marked down to $11 at my walmart.
 

·
Registered
Joined
·
412 Posts
JoeLad said:
Hi folks. My first post here, but I've been around other boards for a while.

I'm a complete novice when it comes to machine work. Is there a good book out there that explains machine work in simple terms? I need to learn about X and Y axis, cutting tools, etc.


I know working with a machinist would help me immensely, but I don't know one.

Thanks!


JoeLad
JoeLad,

There is a two volume set call "Machine Shop Practices" that are excellent. There is an old South Bend Lathe book called "How to Run a Lathe". It was written back in the 1940's but it is a pretty good basic book. There are two magazines that are published every other month. One is called "The Home Shop Machinest" the other used to be called "Projects in Metal" but the name has been changed. I can't remember what the new name is this second. (Senior moment!)

The best hands on method that won't cost an arm and a leg= check your local vocational/technical state run school. They may have evening machine shop courses. They last two semesters generally. You will have to pay for the course, cost of the course book, and a small "Lab" fee. (Usually discounts for veterans.) These are well worth the time.

Lastly, look on the internet for "machinist clubs" in your area. Some of them meet monthly.

Yours,
Thumb Clip Pull Pin
 

·
Premium Member
Joined
·
5,980 Posts
JoeLad said:
I'm a complete novice when it comes to machine work. Is there a good book out there that explains machine work in simple terms? I need to learn about X and Y axis, cutting tools, etc.

JoeLad
http://155.217.58.58/cgi-bin/atdl.dll/tc/9-524/toc.htm

Helped me.
I agree, The Machinery Handbook is excellent on the night stand. I can think of nothing that's a better aid to sleep.

 
1 - 7 of 7 Posts
Top