Joined
·
1,580 Posts
If there's contact between the center support and the bolt carrier you need to post some pictures of that. I would not fire the weapon. You need to look long and hard. If you have a known good functioning rifle do some measuring. I also would look at the interaction between the safety lever and the disconnector.
Possibly like the safety lever may be a bit out of "adjustment".
Check to make sure the disconnector is not being kept from engaging the hammer. You may have to grind a bit off the safety.
Are you using the FCG that came with the 63? If so the disconnector should have an extra foot sticking out. This should be replaced.
Possibly like the safety lever may be a bit out of "adjustment".
Check to make sure the disconnector is not being kept from engaging the hammer. You may have to grind a bit off the safety.
Are you using the FCG that came with the 63? If so the disconnector should have an extra foot sticking out. This should be replaced.
