Gunco Forums banner
1 - 15 of 15 Posts

·
Scheiße.
Joined
·
1,367 Posts
Discussion Starter · #1 ·
Hey guys, I picked up one of the CETME C kits from Apex for $149 finally. I wanted to know if anyone had one of the fancy flat bending jigs I could rent? I've previously tried making my own, and using the steel dowel/screwdriver and pliers methods and have been horrendously unsuccessful. If not, my buddy and I are just gonna split the cost of a jig from like robertrtg or hkparts. Thanks in advance!
 

·
Registered
Joined
·
215 Posts
i was hoping somewhere local.
if you split it with a friend it will probably won't be too-too bad. still a bunch cheaper than buying a new or used one - hunk of metal you will never use ever again.
give me a shout if you can't find anything local. i would think there gotta be a lot of builders in Cali, just because of all the state-restrictions and size of the state.
 

·
aka: SDK1968
Joined
·
7,844 Posts
we've got them over at WG for free to members.... all you have to do is pay for the shipping.

we have several styles.

Mojohana style

press style

& non press screw jack style.

some of them are heavy.
 
  • Like
Reactions: Mr_Posthumous

·
Registered
Joined
·
1,577 Posts
I bought a jig from robertrtg. to build my Cetme C after building I plan on selling it to get my $$$ back.
The only problem is robertrtg. is out of flats now, is there some place that sells flats that work on the RTG jig?
 
1 - 15 of 15 Posts
Top