Gunco Forums banner
1 - 10 of 10 Posts

·
aka: SDK1968
Joined
·
7,844 Posts
still want one of these...... but would love to have it in x39
 

·
Registered
Joined
·
9,759 Posts
Discussion Starter · #7 · (Edited)
http://mcaceak.com/adapters.htmlI would like to build one just for the hell of it, would be a very mild shooting rifle. I have converted M1's in 30.06 to .308 with chamber plugs and they work fine with milsurp after finish reaming the chamber to .308. I wonder where if anyone makes a chamber plug for 7.62x39?

Answer to my question:

lhttp://mcaceak.com/adapters.html

A discussion from Snipers Hide:

 

·
Registered
Joined
·
152 Posts
Intersting thread about twist rate, bullet mass, size, etc. But what would be the point to the exercise and expense of building or converting an M1A? Okay, they're 400-500 bucks in Canada but here? Certainly not just to save on ammo cost.

I know CZ does or used to make a x39 bolt gun available in the US.. Toyed with the idea of getting one but how accurate, I wonder, can x39 be w/o spending $1.50/rd.
 

·
Registered
Joined
·
152 Posts
"
Now you can turn your 308 or 30-06 into a 7.62x39 and

take advantage of inexpensive ammo!



"Simply coat the the outside of the adapter with non permanent Locktite™, place a fired 7.62x39 case inside the chamber and close the bolt. After 10-12 hours, eject the 7.62x39 case and you are ready to start shooting. Inexpensive Russian ammo costs 25-50% less than any regular 308 or 30-06. A broken shell extractor will remove the adapter and return the gun to it's original caliber. If you are careful, the adapter is reusable!"

Huh, just like that?
 
1 - 10 of 10 Posts
Top