Gunco Forums banner

Status
Not open for further replies.
21 - 22 of 22 Posts

·
Premium Member
Joined
·
6,900 Posts
Discussion Starter · #22 · (Edited)
Finished and ready for test firing.
Summery of this build

Starting out with a well used 1937 Czechoslovakian VZ-24 (Large ring Mauser)

I blueprinted the bolt and receiver and mated it to a Numrich trapdoor trigger guard assembly. Then I inlet it and pillar bedded it into a Boyd's laminate stock.
I re-chambered it to .308 Win. using a 22" Shilen #5 contour barrel with a 1 in 10 twist. I cut off the straight bolt handle and fabricated one of my own, which Zap welded on for Me
I drilled, tapped and installed a one piece scope rail, then assembled it using a Bold Optimal trigger, a Titanium firing pin with a speedlock spring and a sporter bolt shroud.
I finished it off by adding a grip cap, recoil pad and swivels to the stock. Topping it off is a Simmons 4-12X44 scope and a Harris bi-pod. I fully expect this rifle to shoot MOA.
 

Attachments

21 - 22 of 22 Posts
Status
Not open for further replies.
Top