Gunco Forums banner
1 - 5 of 5 Posts

·
Administrator
Joined
·
160 Posts
No, the Romak is longer and is flared out for the front trunnion, like a RPK.
Rear trunnion is also different.
 

·
Happy Camper
Joined
·
7,794 Posts
Yeah you'll have to get a Romak-3 receiver from a dealer. AFAIK Centerfire was the first dealer to have them available, and some other dealers are getting them in stock...

http://www.centerfiresystems.com

hth,
- Jerry
 

·
Registered
Joined
·
2,263 Posts
Keep in mind these receivers seem to need a little work. My rail were bent in spots, and too wide. Mag well too small. You can get them to work, just don;t expect a drop in fit.
 

·
Registered
Joined
·
4,077 Posts
I have to agree with 00redZX-6R when he said "do not expect a drop in fit.I had to a adjust my rail for the bolt to travel smoothly onto the trunion. also my rails were rough on the edge so I had to use a small file some. the build presents some new chalanges to overcome . not more difficult just differant.
now I am rembering fileing the mag well to fit too and needing longer rivets to get a look I wanted.
 
1 - 5 of 5 Posts
Top