[BlackFetus]

one of my last full kits, matching bolt + carrier + front trunnion the main parts for all you snobs that need matching kits, i figure if your building a akm, your custom fitting everything together anyways, so the numbers sort of remind me of people who keep action figures in the original packaging, okay, im sorry i had to rant about that, i had a really rude private message about that recently, i wont name names O__O YOU KNOW WHO YOU ARE

 

[BlackFetus]

well, apparently gunco is haveing issues? im trying to post the 5 last pictures of this kit, one thing, for you super detail orientated people - the pin thats missing in the pictures of the pan out view next to the barrel population pins, showed up later to be pictured in the close up, so yes, its there, it has all the pins, has been head spaced with an arms of america nitride or whatever coated barrel, thats the one that is apparently more accurate then chromeing a barrel and is just as corrosive resistant, personally i think these are the way of the future of building firearms... and i WAS building this kit for myself, with a freind that ended up being shitty, so i like my guns to be as good as they can when im building them.
anywase,

+30 rd steel mag and 20 rd steel mag included
+club foot wood RPK stock
+extra plastic top cover
+upgraded gas tube, more modern kind that has the rear spring for a better fit, these are better then the old romanian ones and add a tighter tolerence to your gun
+extra rear sight spring
+USA TAPCO trigger, sear, and hammer with sleeve for easyer installation 3 922R COMPLIANCE PARTS
+Best ak pin sheperds hook or crook or whatever, makes installation way easter, plus originals there
+2 diffrent pistol grip options ones yugoslavian, dunno about the other, may be a ak74 varient
+5mm ak-builder machine screw
+oversized ak-builder barrel pin (pictured)
+complimentary ak-builder AKS UNDERFOLDER RIVET SET
+traditional AK cleaning kit with components
+saftey selector had a notch welded on for a "krebs custom" feel, manipulating the safety with your pointer finger, opposed to removing your hand from the pistol grip to select fire or safe, i do this to all of my aks, its one of the easiest and best modifications i believe to the FCG of an ak, if you dont like it, just grind it off, you should re-finish your parts to the receiver regardless, that is if your seeing the build all the way through, so it shouldnt matter too much
+UNDERFOLDER stock + hardware + REAR TRUNNION +pins
+cleaning rod
+USA muzzle break, modeled off the ak74 one, fits barrel threading, was chromed so it was easyer to clean
+ALSO a east German/possibly polish tantal wire side folding stock for installation with the FIXED stock rear trunnion, yes, there's two different rear trunnions on this kit, for those hobbyests with lots of different kits that want some variety of stock options, this kit if perfect for you, with lots of extras and goodies for collectors

asking price of 340 - SHIPPED, if you were to part pout everything in this kit, youd notice it would sell for more, plus im including shipping, and a badass barrel with partial headspaceing/ installation already done for a easyer build, rivets and other goodies
please do a discreet paypal gift or transfer to [email protected], i will respond to private messages and emails quicker then classified thread comments, please send discreet, dont mention anything, not your address, not your moms cat, and defiantly nothing about a firearm or gun, iv been docked money in my past sales because someone had to add their address in the paypal message thing, or little shit, i dont want to lose money because some people dont know how to use it, so go slow and read everything, send me a private message or email with your shipping address, full name and number (fedex likes having your number when shipping apparently, figure it just makes it more likely to get to you in case your fedex driver has a seizure when delivering your goods, i WILL not call you, thats weird, no)

thank you for looking, willing to adjust price if someone doesn't want all the extra stock options or extra goodies, but would prefer to discuss that in private, mainly targeting building hobbyests with this kit who have several others and like variety, i also want to see how well this does, because i have 3 other kits with what, id like to do, the same thing, add a bunch of options with a good fair price/ discounted for all the extras just so its a better sell to the end user, and so i dont have to part out individually things, thast going to be a pain in the ass, eventually i will - but i want to sell of the kits first, noticed a bunch of extra gas tubes, folding stock mechanisms, and 3-4 bolt carriers that wont have a home with a kit

 

[BlackFetus]

hrm, i canr seem to post the rest of rthe romanian kits picrtures right now, i have 4 more to go with that lone stock picture

also up for sale is 2 PKT demilled torch cut recievers, one i started cleaning the slag off, and removed the chargeing handle plate so restoration of the reciever is alot easyer, im thinking 100 per reciever, or 180 if theyr both going to the same person, shipping is included in the price, which i think people take for greated alot -____-

also: i wanted to raise awareness, and show off the PKT/PKM kit im going to post once im done processing it and getting good pictures, itll have a bunch of rare partd/ custom made ones
+80% protex or whoever reciever, all bent up with the plate welded on, just needs rails trimmed and secondary rails added / ejection port and other holes
+full apex guns PKT kit
+non demilled fresh barrel that fitst the PKT front trunnion, and gas block/front sight block (just weld a front sight on. since pkts dont usually have those)
+RPK bipod welded onto as tube, like a real PKM, will show it next to a real one, its the same bipod, since they stream lined so much of theyr weapons, the pistol grips the sam from a ak, same with the screw that holds it to the "FCG" houseing
+UNDER reciever bracket for mounting the drums or boxes or whatever theyr called to the reciever of the pkm, rare peice to find, and is orginal to PKM
+PKM rivet set
+m249 SAW rear sight for adding to top cover/ will show how i did it, or you could buy a stamped top cover with the sight on it from a polish guy ill refrence when i post the kit
+you can order a rear stock, but im includeing a m249 styled saw stock, up to you, robert RTG gun parts or whatever the websights called si where i got my PKM rear stock, mint condition
+ASSULT BOX, for mounting under pkm, with 100 rd belt, harder to find item as well
+original demilled barrel, that id preferr to cut up for the barrel parts to save on shipping cost, but if you want it, then you got it, has 3 bore sized holes drilled into the chamber, behind gas block, and drilled onto front end/sight block
+ORIGINAL hard to find PKM fire controll huseing, includes pistol grip and screw for holding it on
this is basically going to be everything you need to build a PKT>PKM conversion build, theres several members who have built them before, this is a pretty sweet deal to have all these hard to find things in one place, its taken me years to find these parts, and because so, i ordered two of most things, im keeping one parts kit for myself, but i dont need of them

thanks for reading, hope this description perks some intrest as im processing the kit/ finding a fair price, i think the 80 percent reciever and the new barrel were from weaponeers fourm, it took the guy more then a year to get them to me, so whoever buys this doesnt jave to wait that long, hahah, your lucky, and ill try and price this as fair as possible, but theres some real hard to find parts in this kit, so, being fair to you, and me is what the outcome will be, most likely will charge shipping for this, considering the weight of a bunch of items like the fireing stennoid, front trunnion mounting block thing that sits underneight the front trunnion, huge peice of worthless metal, and the original barrel is a good 30-40 lb paper wight with those bore holes in them,

thanks for looking / reading my insane rambleing

 

[Mr_Posthumous]

prices man! the receivers I saw, but not on anything else? Good luck with the sale, hope you can get this pics up!

 

[Bradrock]

Sumbitch man! I wish I had a pile of moolah right now. Great price on the Romanian kit group. I don't NEED any more. But for some reason I WANT more.
You'e got a PILE of cash into the PK stuff. I know because I spent a few years gathering the same parts & your way ahead of me.
I'm going to see if I can scrape up some dough.I'd like another Romanian kit & a PKT/m barrel.

 

[BlackFetus]

Hah! Mr_posthumous - I love your avatar picture, it reminds me of a veggie tales BANNANA who's been pushed way too far... Sorta like the guy in the office, anywase, I did post a price on everything I'm selling in this threads, the Romanian kit with all the extra goodies is going for 340- shipped, and PKT receivers are 100 each includeing shipping, but if you buy both then it's 180 shipped.

needed to edit that, now that i got 4 hours of sleep opposed to none that seemed a little tired crabby.
bradrock, im not parting out anything with the PKT kit- it took me forever to make it this whole, im not about to lower the cost by ripping it apart, and i have someone already emailing me about the romanian kit
cept he wants to lowball me, well see if its a lowball and wants everything, or a "im cool with you removeing stuff because im dropping the price" welll seeee
awesome to have bites this early in the posting, im glad someone liek, you sees the value of all the extras, i have 3(?) more kitsd kinda the same, missing random shit, but, hopefully makeing up for it with extras, and theyv got the key key components, like recoil spring, front trunnion, 2 back ones, bolt, carrier, trig guard, FCG, pins for barrel population, rear sight, it gets hazy with the front sights and gas blocks, those arnt as expensive to buy as parts as persay... a front trunnion is

 

[BlackFetus]

PKT RECIEVERS 100 EACH, OR 180 TOGEATHER
i will not part out PKT kit, and will post it elsewere on its on thread, wanting to generate intrest/ see the interest of it, iv got alot of money and time in it, like bradrock said- shits super hard to find/ i even had to western union to warsaw poland to get parts

 

[BlackFetus]

you can see the CRAPCO BUHWEGFUYWEYUIEW TAPCO USA on the FCG, and barrel brake thinger, the upgraded gas tube for better fit and finish, and other details, random building tools added from ak-builder

 

[Bradrock]

Gosh, I would never aask you to break up that Pk set! Just commenting that I need a barrel. My kit barrel has the de mill holes off to the side.

I'm going to transfer some money into my paypal account here in a bit & maybe get a chance at one of your Romanian kits. Sometimes takes a couple days to show up.

Your being way more than fair to your Gunco brothers!
Even If I don't buy anything, I'll remember that.

 

[BlackFetus]

fosho, defiantly trying to be fair to my gunco guys, they helped me out, plus i know the itch these kits scratch for you guys, hahaha, well, bradrock, i have a PKT shanked barrel thats profiled for PKM barrel components, if you wanna buy that, i have a front sight, no pins, and a gas block that dont fuckin fit it, you could make a sleeve to make it work, or buy a different ethnicity - ill part with that one seperatly from any kits, but i dont want to go in the hole over it, im trying to re-sell shit for a fair price, and that thing wasnt easy to come by, in compairson to PKM barrels, it was, hahaha, those go, for what, a grand? shit... feel free to PM me for that

 

[BlackFetus]

ROMY KIT WITH EXTRAS SOLD, PKT recievers still up for grabs
PKT kit will be posted after a few more "ak batch kits" are